Open For Voting

B14: Adjust the DataView Layout Editor - Configure a drill on last block option missing
Hi @Product Management Team, I think it would be great if the possibility to configure a drill action on a block in a dataview was available on every block. The last block in a layout can't be configured due to the "preview" button which obscures this feature: Best, Helmut
Option to save and create next step in procedure
Hi Team, Hope you're doing good. This idea is just to make the developer's procedure-building task/habit more convenient. Whenever we create a step in a procedure, we are supposed to save it and then again click on the plus '+' icon below that step to add another step. If we have an option of clicking a button as 'Next…
Ability to associate Mask at screen level as screen properties
Once we define a screen mask, we need to associate screens with the mask. This exercise is time-consuming and does not work in the first go on many occasions, forcing users to redo the whole thing again. When a lot of screens are associated with a single Mask, the performance to associate and disassociate degrades. It…
mirrored Leaf in unbalanced Hierarchie
The unbalanced hierarchy is a strong function. Unfortunately, it is only possible to aggregate using a single tree. Hierarchy nodes Description Root Node A node that is not assigned under any node and has no parent node (predecessor). Node A node that has successors, which means all nodes except for leaves. Leaf A node…
B14 - Reset Selection to Screen default
Hello, with b14 a change was introduced, that the selection is not reseted to screen default, when switching from User View to Dev mode. Screen design. Makers and end users can quickly switch between Design and Play mode and can do so with a Selection continuously applied rather than being reset. Enjoy faster development…
Link Selectors/Pagers to Objects on the Screen to increase flexibility
1. What is your idea? Currently there is the possibility to have selections for all objects on the screen. In addition, only directly in the Layout can be done a selection for this one object. The Idea is, to give the end user of a screen the possibility to do different selections to different objects on the screen using…
Broadcasting improvement
Current limitations A broadcasting action cannot be set in a procedure to be scheduled (since it's a web aside action). in the broadcasting panel there's no possibility to set a condition to run or not an action there could be cases where I would schedule a bradcasting based on a condition (e.g. send the email only if an…
Homepage Trigger
Hello! I think it would be very useful to have triggers also on the homepage of the capsules. The client would like to modify the capsule navigation and the information available on the home screen depending on the type of user that enters the screen (relationship that we have stored in a cube). As we do not have the…
Handling of .cfg Files in Text File Data Reader
In Board 12 & 14, the Text File Data Reader has a limitation in how it handles .cfg files when a pattern filter is used in the "Connection" tab. This impacts the automatic mapping of fields and the correct configuration of the file settings, such as delimiters, headers, and other parameters stored in the .cfg file. Issue…
Enable data entry at a higher level when cube has 0 value
Hi, as the split and splat functionality goes, unless the cube 1 has some values, if we want to enable data entry at a higher level of aggregation than the cube 1 dimension itself, the data entry only becomes enabled if the cube as a value. To resolve it, we flow a very small constant number (by opening up the calculation…
Allow the use of Temporary Cubes on Smart Import objects
The idea is simple: Allow the use of Temporary Cubes on Smart Import objects as we do for Data Readers. It should be possible to type the Temporary Cube name and load data into it. The Temporary Cube should be configured in the Trigger Procedure launched after a Data entry action. Today, for the Smart Import object, we…
Display value in procedure step "show message"
Hello, it would be helpful if we could display a value in the “show message”-procedure step as part of the message and ideally also change it. Example: Planned values from the previous year are to be transferred to the current year, taking into account an increase factor. As part of the procedure, the user would be…
Split&Splat functionality extension to even/repeated distribution
Hi, I wish to have the split&splat functionality broadened, so it is not only able to split values according to the existing proportions, but have the ability to repeat the value, or to spread it evenly onto all leaf elements that are open for data entry. It would be excellent if developers could set what kind of…
Show certain layout blocks as single column, even with entities by column
Sometimes you'd want a certain block displayed as a single column an others displayed per element in the entities by column. This could for example be a budget for the year and than the actuals by month. The way we have always achieved this is kind of an awkward work-around. For the block that should be a single column we…
Integrate FlexGrid execution data in Logs
Hi all, currently we have no way to monitor performance of the layouts executed in a flexgrid object, which is key to understand performance issues and the use of the new object by end users. Idea : add a new log to track the following info on flexgrid layouts executions : dimensions used in rows number and nature of…
Name orientation for collapsed nested entities
Hi Today the alignment is presented to the right for Name orientation for collapsed nested entities. Can you make us have the option to chose left or right. Lars
Auto-updated "control" cubes and entities giving us what cubes, entities etc we have
At the moment, we only have one set of entities that come pre-built into the system, and that is the time hierarchy. Days, months, years etc. I propose adding more, control entities, and even cubes to this list. What I think would be beneficial would be: entity whose members are a list of all the entities entity whose…
B14 - underline & data entry trigger options should appear immediately
instead of clicking on the button again
B14 - Rework Date Filter in Logs
The filter option in the logs is frustrating to work with in its current state. The standard option is not "contains", infact contains does not exist at all. The field requires the date and time as an input, it's not possible to filter for example by year unless you choose one of the other options other than equal
B14 - bring back the enable button for data blocks options in the layout editor
These buttons exist in B12 but were removed in B14. They significantly reduce the amount of clicks needed to remove set options from a block. In the case of the detail by it is difficult to even find the reset option at all.
Expand datareader edit window in Board 14
The edit window for datareader in Board 14 is way too narrow. Currently it is nearly impossible to fully identify cubes, SQL table names or column names on a regular screen. The edit window for datareader should be just as wide as the pop up which opens when creating a new datareader:
Board Tree Public API
In addition to the existing APIs, it would be useful to have a public schema for retrieving a specific hierarchy via API, similar to the one available for entities. Currently, if we want to extract a tree from the Board, we must create a custom API query that includes all the necessary fields from the layout section, which…
Filename substitution formula in Data Readers
Hello everyone, It could be useful for developers to have the following functionality implemented in Board: A new substitution formula @filename that returns the name of the file being loaded in the Data Reader. This formula could then be used in the ETL. Usage example: The client's cubes have the dimension "Month of…
Board 14: Please bring back the possibility to change the screen fit mode in design mode
With Board 14 the possibilty is vanished to adjust the applied fit mode in design mode. You can only change the screen fitting when you are in play mode. In our opinion working in an actual size mode is not always the most efficient way, especially when arranging screen elements or when the enviroment background with an…
B14: Enhance Debugger options
Hi Team, I was used to work with layouts in the debugger the same way as in a DataView Layout on the screen - adjusting column widths, exporting to XLS, searching for cubes to add as block into the layout… This is the behaviour in B12 whereas B14 behaves pretty differently in those cases: You can't export, you can't edit…
Improvement in Font Configuration in the section MODELS in case of Unbalanced Hierarchy
Hi everybody, I would like to share with you this strange situation that happened to me. I set my first unbalanced hierarchy and i'm trying to create a good report for the client. The report that i did before was with a normal hierarchy about income statement. I would like that also the unbalanced hierarchy could be bold…
Impact Analysis scope to include Capsule procedures
At the moment, impact analysis only reports on the objects and their dependencies that are present in the data model. This excludes the capsule-level procedures. For example, If we search for a procedure and identify which other procedures make a call to it, it only lists the procedures at the data model level while there…
Calculate data flows on GPU (ILGPU)
With machine learning, for example Tensorflow, it is possible to perform calculations on a CPU or GPU. Powerful GPUs are often used for this in order to achieve a significant performance gain. Idea: Calculating data flows in Board using a GPU. I could imagine that this is possible using ILGPU. ILGPU is a new JIT…
FlexGrid - Pivot column collapse function enhancement
In FlexGrid, in pivot mode with at least 2 column labels, when just one block is used as a value is not possible to collapse the most detailed column label: This is a standard behavior The request is to change this behavior introducing the possibility to collapse column labels even if we have only one value block.…
Paste a selection from e.g. excel
Hi, a possibility where I can select e.g. several customers by simply posting a list of customer numbers from an excel into the selector would be amazing. Checking a number of, lets say, 100 customers currently forces you to search and select them one by one (for an enduser). Therefore a copy paste solution from an…

Open For Voting

Discussion List