-
Standard colour of label value should have the proper contrast
When creating charts Board automatically takes colours for the different series (which is good, especially as you can also manually change them). However, the values shown from the labels should be coloured in the way that it is visible…in the screenshot below the values in the blue series are not visible - if you hoover…
-
UX Improvement Ideas for Selectors
Hi everyone, I wanted to share a valuable piece of feedback from one of my clients regarding the user experience with selectors in Board 14.2 : Item Spacing: The items in dropdown selectors are currently too widely spaced, which limits the number of visible options. A more compact layout would improve readability and…
-
Exclude option on selectors
A little improvement to the selector object would be to always have the exclude button available when the object is on the screen. At the moment, it is only possible to either select (if the including option is enabled) or exclude (if the excluding option is enabled) I would like to decide on the spot if I want to select…
-
💡 Feature Idea: Enable Tooltip Compatibility with 'Detail By'
Hello Community Currently, when using the tooltip feature together with the 'Detail by' option, the tooltip only appears on the total row, not on the individual detailed rows. 👉 Interestingly, when the entity is placed by columns, the tooltip works as expected and displays correctly for each column value. It would be great…
-
Security restrictions on Master data changes
Hi Team, Currently Board allows master data changes through Data readers, Data views and smart imports. We have a control on addition of new members into entities where we can either select or reject the entities. However, There is no specific control on relationship changes. An user with any license can update…
-
Double Click to Enter Data Entry Drop Down List
Hello, In B14, there is currently no way to interact with a data entry drop down list without using the mouse. The user must double click on the cell to display the drop down list, and then click once again to choose a member. In data entry forms that are comprised of a mix of direct data entry and suggested values, it is…
-
Select Entity Based on Cube Option
Hi, I would like to suggest a new feature on select based on cube on procedures. Quite often I need to select tuples based on cube even if the sum of the tuples over a period = 0. In order to do so we have to create a Temporary cube. Could we imagine an option just like keep mode to set select tuples even if the sum of…
-
improve Screen list behaviour
When you are on a screen in a capsule and open the screen list (either via fly out or via the buttons) the screen-list appears in the collapsed form (if there are subfolders in the capsule). I would prefer if the screen list would open showing the screen you are on and therefore show this folder structure open. From my…
-
Data Model Package: filter out entity & cube position switch
When creating data model packages for databases with numerous entities and cubes, the 'changes' list often includes a large number of position-only updates. For example, my last package had 102 entity changes, with 98 of them being solely positioning updates. This makes it difficult to identify meaningful changes. Please…
-
Board 14 - Confusing design tooltip border in layout
Hi, When hovering over tooltips in a layout, a confusing triangle shape appears. This shape can be misinterpreted as indicating additional information about a specific field (e.g., 'Measure Type' in the attached screenshot), which is not its function. Can the triangle shape be removed?
-
B14 - Reset Selection to Screen default
Hello, with b14 a change was introduced, that the selection is not reseted to screen default, when switching from User View to Dev mode. Screen design. Makers and end users can quickly switch between Design and Play mode and can do so with a Selection continuously applied rather than being reset. Enjoy faster development…
-
Extract / Reload / Clear Cubes by Group and Support for Sub-groups
Hi Community Currently, procedure steps like Extract Cubes, Reload Cubes, and Clear Cube apply to all cubes or to manually selected ones. I suggest two improvements: Add the ability to perform these operations by cube group(or subgroups - improvement 2) (via dropdown selection) Introduce the concept of subgroups within…
-
Ability to Set a Data Entry Trigger in drill down popup
Currently the Data-Entry Trigger can be set only by the master data-view , it will be good to set a custom data entry trigger specifically designed for the drill-down popup. For now, we can work around the issue using 'Drill to Screen', but it would be interesting to have this capability within the 'Drill Down' itself.
-
Procedure Concurrency Management: Lock Edit Mode When in Use and Enable Read-Only Access
Hello Community, Currently, multiple developers can open the same procedure in Edit mode at the same time, which increases the risk of overwritten changes, loss of work, and version conflicts. I suggest implementing a concurrency control mechanism where: A procedure is locked as soon as it's opened in Edit mode. Other…
-
No transfer of selections made in play mode into design mode without having been asked
Other than in the versions before, Board 14 transfers temporary selections done in the play mode automatically to design mode when switching to design mode. This very quickly leads to the screen being saved incorrectly (with the wrong standard selection) if you are not very careful. And this results in a lot of extra work…
-
ALM to allow selection of desired objects to migrate at source
In the current scenario, if we need to migrate objects from one source to another, we need to take a snapshot and compare the differences at Target to determine what all objects should be migrated. In projects where multiple users might be developing objects in parallel, this requires a lot of manual effort to identify…
-
Enhancement Request of ALM (Transporter)
ALM (Transporter) shows position information even if we do not change anything of structure of cubes, entity. This makes customer confused. This is impact for customer to increase checking cost which meta data needs to migrate via ALM. Could you improve to filter position information?
-
Upgrade/Migration tool
Hello team, I expect to be considered enhancement of a tool to reduce the workload involved in verifying/testing after the version upgrade. The desired functionality includes exporting and comparing positional information and setting values displayed on the screen. If it is difficult to provide comparison feature, using a…
-
Font size of screen name
Hello team, Font size of screen name on B14 is smaller than B12 or older. I know it is by design on B14 in current. I expect it can be updated to be changeable in design mode or mask setting. Could you consider this in new release? Masa,
-
The variety of line styles for the Cartesian graph.
Hello team, Let me post the idea of "the variety of line styles for the Cartesian graph". Customer would like to choose dashed or dotted line as line style. Especially, it is benefit to use monotone printing the graph or easy to identify the each lines. Could you please consider this feature in new release? Masa,
-
Smart Import should accept the uploading of zero
Currently, in Excel if I enter a zero "0" as a value, when I upload using Smart Import, it says it is successful but no value appears in the app. It is as though Board (Smart Import) doesn't know the difference between a null and zero! This is a very big pain for us where users often need to upload zero as a valid…
-
Filter and sort Option Flex Grid
Hey, to make the flex grid usable after the 14.3 update it would be good to have the same option of filtering and sorting as in a dataview. Greetings Julian
-
Suggestions for Chart and Data View Enhancements
Hi Team, Here are a few suggestions for improvements in the Charts and Data Views: Additionally, when the "Auto-Range" feature is enabled for the axis, the value range adjusts correctly, but in some cases, markers get cropped. It would be helpful to either adjust the auto-range logic to ensure markers remain fully visible…
-
Addressing Timeout Issues in Azure ML with Batch Inference
Dear Team, During inference on high-volume datasets in Azure Machine Learning—particularly those spanning multiple countries, departments, and similar entities—we have encountered procedure failures caused by timeout errors. These occur because the inference process does not complete within Azure ML’s default maximum…
-
Enhancement Request: Automatic Cleanup of Azure ML Endpoint Deployments
I would like to raise a concern regarding the deployment process in Azure Machine Learning Studio. Currently, when the same forecast scenario is executed multiple times, the existing deployment on the same endpoint is not automatically removed. This results in deployment failures unless the previous deployment is manually…
-
Text Cube (Rich Text format) rendering in data view - to include the formatting in the display
Issue Description: There is a text cube where the customer enters comments during the planning cycle and while entering the comments their requirement is to also format those comments like highlight some text in Bold, underline etc. So for now this is achieved by using the RTF type of cube. But then the issue with the RTF…
-
Improve Procedure Sorting - Add Last Modified / Creation Date Columns
To improve the tracking and maintenance of procedures in Board, I suggest adding the following columns to the procedure list view: Creation Date Last Modified Date These columns would allow developers to: Easily sort and filter procedures based on recent changes Track the history and relevance of procedures Simplify code…
-
Card Object improvement
The card object is most commonly used as a Master Object, where selecting an entity member within it should dynamically update the rest of the screen. However, current usability limitations make this interaction unclear and unintuitive for users. Unclear Click Target: Users don't know where to click to select an entity…
-
Diagnostic Log Levels Customization
Board's diagnostic logging currently follows a fixed order of detail levels, meaning you can't pick only certain message types without including previous levels. This often fills logs with unnecessary information, making troubleshooting harder. The idea is to allow selecting individual log levels (like Fatal, Error,…
-
Add Total row on Top
Hey guys, we have the option to have the "Grand total row on top". Would be good to have the option to have the "total row on top" as well for dataviews with more than one entity in the rows. Greetings Julian