Best Of

URGENT UPDATE: Be very aware that a number of pop-out menus require expanding to access all options. 

Hi Borja, I was equally intrigued by your mystery so me and the kids went snooping around and here's what we found. 

The dynamic selection indicator functions exactly as it did in BOARD 10 BUT, you will only see all options if you expand the pop-out window.  This is a very interesting situation as the pop-out is correct only if you know to expand it for height and width in order to see the hidden options.

My original response appeared correct as I wrote it on my laptop with a low resolution.  However, whilst working today, I have performed the very action I had stated could not be done, to make a dynamic selection based on a cube from the window selection icon.  This time though, I was working on my 27" UHD screen and now I can show the error in all it's ugly glory.  Image 1 is the screen setup.  I have a data entry dataview to write a value to a cube 1D:Tenure.  Image 2 displays the pop-out as it appears on a 1366x768 resolution screen.  Note the '...' denoting a continuation of the text.  Also note the lack of any ability to select a cube for use as a dynamic selector.  The pop-out is capable of being expanded and, on expanding, Image 3 shows the full options available.  Image 4 is how I saw the options on a 27" UHD screen.

The ramifications for this are very severe.  If users do not check that the pop-out window needs expanding, they risk missing important selections.  this is a point that should be brought to the attention of the BOARD software developers for update in a future release but, more immediately, it should be brought to the attention of all developers moving to or operating on the Board 11 platform (maybe even Board 10.x.x).

I have now raised an idea on this here: https://community.board.com/ideas/1214-board-11-optimised-pop-out-menus-for-low-resolution-displays

Borja, this is an excellent outcome for me as your query has led to the discovered a potential pitfall of the platform which can now be notified to fellow developers.

Image 1: Cube 1 1d:Tenure & Cube 2 2D:Branch, Tenure

Image 2: Dynamic options as seen on a screen of 1366x786 - note the ability to expand the pop-out window and no option to pick a cube to base selection by.

Image 3: Fully expanded pop-out dynamic selection options with drop down to choose cube to base selection by.

Image 4:  Dynamic options as seen on a screen of 2460x1440

Original response

The [...] box in html5 appears to have a less confusing role than it did in desktop.  It now seems to serve as an interactive indicator to show when a dynamic selection has been applied through the capsule designer.  This would suggest that developers previously using it to directly configure screens, as you described, might have to re-think their designs on migration to B11 - this is an especially dangerous point for developers with inherited models and no config notes.

You can test this point for yourself by carrying out the following actions, or any similar process:

Step1.  Opening a screen in design mode - [F4] & selecting a target entity with no selections in place - I've chosen the Entity: Brand as shown below and has no selections against it:

Step 2.  Attach a dynamic SELECT procedure to the OPEN trigger of that screen.

Step 3.  Exit design mode - [F4].

Step 4.  Select theicon and search for the selection you used in the procedure where you should see that it is now ticked - the RED box indicating this:

Incidentally, you will have noticed that a blue tick is applied to the left also.  This is to indicate an active selection on an entity and appears when anything is selected either by the user or through a procedure of any type.

Hope that this clears up the mystery for you Borja. As I'm sure you're aware, BOARD don't always explain their fiendish 'features'.

They'd have gotten away with it this time too if it wasn't for them pesky questions.

 - well done.

BOARD 10 and below do not support concurrent processing, as Bob Gill has said.  Notwithstanding the points stated by Björn Reuber, the issue is not about disparate objects but with the BOARD Server.  With BOARD 11 and the B/eng (or Big Bang Engine), parallel processing and concurrent calculations will be possible as the engine has been configured to make better use of multiple cores and memory.  There is no need to change current system setup either, like adding more ram and cores, as the system will work with all current configurations.  That said, with increased resources, you would see a performance enhancement,  on top of the added versatility.

BOARD 11 is scheduled for release in Nov 2018, with three incremental releases prior to that.

Thank you very much for that Jonathan.  Independent views are so valuable when trying something brand new and to receive positive feedback only motivates me further. 

Regarding the production, I had a very tight turnaround - a day - which included first learning how to use the opensource software - SHOTCUT.  The still I used for the links is very poor and I had not even noticed until I had delivered the film, but I will pay closer attention to detail after your observation. 

From a technical standpoint, whilst the film is very short and simple, getting to grips with the software, overcoming its nuances and handling random crashes added to the pressure, but I had to know that I could amend anything once delivered.

As it is now, I consider myself of intermediate ability with SHOTCUT and look forward to creating content that will help to communicate complex concepts in a relaxing and enjoyable manner and without the need for narration or a physical presence.

interested typ - do you copy the symbols or are you able to use the keyboard to enter the uni code?  I have tried with the keyboard to insert an up arrow - [Alt] + 2191 - but get a capital A with a small circle on top [Å].  However, I will now be using unicode characters as presented by you and Bettina Clausen so thank you both for the idea - really great solution.