-
Year-End Value While Retaining Month Drilldown
Good afternoon, I am trying to create a graph that displays the year-end value. At the same time, I want to maintain the ability to drill down by month and see all the preceding monthly values. Does anyone know a method to achieve this in the graph? Thank you.
-
Color Alert
Hi, I would like to apply a color alert. I have created an true or false formula which is used in the color alert. when I have true or false formula unhidden the alert works but not when it is hidden. Any idea what I am doing wrong?
-
Level 200
Level 200, Module 203 Section 14: L2 Demo Data Model Configure Data View Unit Hello, i'm having trouble selecting fields in data view configuration. this is the training screenshot mine is different, i can only see "time entities"
-
Flex Grid - Opening fully collapsed
Note - Ignore this, found the solution! Is there a way to configure the flex grid so when you load the screen it loads fully collapsed to enhance speed?
-
PDF Export of Entire Data View
When exporting a data view with multiple rows that require scrolling, all rows should be included automatically in the PDF export. Currently, the workaround requires selecting the data view as a separate print area, which creates a page break between areas in the PDF.
-
Split&Splat functionality extension to even/repeated distribution
Hi, I wish to have the split&splat functionality broadened, so it is not only able to split values according to the existing proportions, but have the ability to repeat the value, or to spread it evenly onto all leaf elements that are open for data entry. It would be excellent if developers could set what kind of…
-
Board Excel Add-in: Sort by Columns
Hello, Currently, the Board Excel Add-in supports sorting by rows, but unlike the web interface, it does not allow sorting by columns. This feature would greatly improve usability for reports that require column-based sorting. Request: Please add the ability to sort by columns in the Excel Add-in, similar to the…
-
Level 300 : 305 Functional Test
As far as I can see, I have completed all config as per instructions and I have gone over them to recheck and confirm. I am however missing data on the first question in the functional test. The test suggests there should be data for products Classic, Double Halo and Grey Pearl Stud as below. I however, only have data for…
-
Scale numbers in graphs correctly
Hello, Currently when numbers scaling in used in graphs (for example, show M for millions), the scaling is only applied to the plot area, so, when you hover over a graph. However, by logic it should apply to the whole graph, including the axis. Please accept this idea to improve customer experience.
-
Preventing Split & Splat on Near-Zero values
The issue The current split and splat functionality in Board EPM offers valuable flexibility for data entry at various aggregation levels. However, it can introduce significant errors and instability when applied to aggregated values that are near zero, particularly when negative values are present in the underlying cube.…
-
Send Blob Cubes Attachment through Email
Hi , We need to send multiple attachment through email currently it is not feasible in Board. It would be great if we could take this up in the latest releases
-
Blank Space Utilization/Sizing
There is often unused space in the layout editor and data readers. For example, in the layout editor, the Alignment section's selector spans the entire screen, whereas in the Rules section, the selector is much smaller. This inconsistency makes it difficult to view selected items, as they can be cut off or partially hidden.
-
How to create bar chart in Data View
1. Abstract This article describes a specific use case: visualizing a bar chart in a data view object. 2. Context In some projects, it can be asked to render a bar chart in a data view object, to provide an immediate visual representation of the numerical values directly in line with the data. This allows users to more…
-
💡 Feature Idea: Enable Tooltip Compatibility with 'Detail By'
Hello Community Currently, when using the tooltip feature together with the 'Detail by' option, the tooltip only appears on the total row, not on the individual detailed rows. 👉 Interestingly, when the entity is placed by columns, the tooltip works as expected and displays correctly for each column value. It would be great…
-
Performance analysis tool to find out why a dataview report loading very slow?
Hi BOARD team, I built a simple data view report using Tab. Couple of tables are loading much slower comparing to others. The table is simple and highly summarized. Is there a tool in BOARD we can use to find out why certain reports take much longer to load? Thanks a lot
-
Level 200 : 210 No Data on Expense Planning Data Views
Hello, I am struggling to populate data into both the Annual and Monthly Data views. I have gone through all the steps again. I have also re-run all data readers and the BUD - Initialize Budget procedure, but my view is still empty, and hence failing functional testing. My currency selector also shows 2/2 instead of 1/1 as…
-
Enable Data Entry Validation Rules Based on Other Dataview Blocks
Hello Community, Currently, data entry validation rules in Board are limited to conditions within the same data entry block. This limits our ability to implement advanced validation scenarios that depend on other layout blocks. I propose adding the capability to define validation rules that reference values from other…
-
Add an comment field for each block inside a Layout
Hi Community, I would like to suggest a new feature for Layouts in Board: the ability to add comments to each bloc 🎯 Purpose: This would help developers document the purpose or logic behind each bloc directly in the Layout, without needing external documentation or complex naming conventions. The comment would be visible…
-
Option to hide automatically lines without values in a dataview
Context Very often in a dataview, we face the following situation: * we want to display a P&L value as a % of sales, in a separate column. * to do this, we configure a hidden columln with a "ReferTo" option on the Sales. * then setup a column with a/b, to display the %. Issue In this kind of situation, if a P&L line is…
-
Best practices how to show many columns in dataview (>10 columns with a hundred thousands data rows)
Hi all, I want to know the best practices how to show many columns in dataview with approximately >10 columns with a hundred thousands data rows in a dataview. Because I am stressfull a lot about limitation error rows limit issues. I have read many references from other forums/discussions about this one, and overall of…
-
Aggregate functions for Board Cubes
Hi, if you display a Board cube in a DataView and group it by an entity, then a sum is always formed for the values from the cube. Is there also a way to form an AVG(), MAX() or MIN() on the individual values instead of the sum, so that an average or a maximum value is obtained from the individual cube values? I would like…
-
Calculate Mix including Subtotals
Hi there, how can I calculate percentage mix including subtotals? At the moment it is calculated by group. The algorythm formula GT doesn't work since I have Years in the columns and it does the math for the sum of all years. However I need it by year. Thanks maik
-
Sorting in Data view with Detail by
Hi can someone shade some light into sorting logic with "Detail by" activated? a - is on the first spot and Detail by Year is activated - However it isn't shown in the preview When I move it to spot - b - I can see Occ TY by Year - However now the order of the other columns is screwed. Any idea how to fix this? Thanks Maik
-
Maximum Data Blocks within a Data View
This takes me back to excel days. I'm currently at FD with data blocks and I'm blocked from adding any more in. Is there an upper limit? Has anyone had this same issue or never gotten to this many blocks? Build is in B14.2. I'm trying to add algorithms in not additional data blocks. Doing this with right-click add rather…
-
Issues with 'Detail by' sorting feature
This issue has popped up in the layout editor after I added an entity in the configure drill down. The data is tying out correctly for all my data blocks, the only issue now is when I try to drill down on a specific P&L line. The drill down shows every member in the entity rather than the specific line I am trying to drill…
-
Board 14 - Confusing design tooltip border in layout
Hi, When hovering over tooltips in a layout, a confusing triangle shape appears. This shape can be misinterpreted as indicating additional information about a specific field (e.g., 'Measure Type' in the attached screenshot), which is not its function. Can the triangle shape be removed?
-
Dynamic Visibility of a cube / data block in a data view
Hi, is there any possibility to steer the visibility of a cube / data block in a data view? I want to achieve that I can steer on an admin scree, if a certain cube/data block is visible in a data view on another screen. I know that you can steer the dynamic visibility of the whole data view, but I need it for a certain…
-
Loop function doesn't work
Hi all, I'm trying to do a loop calculation, but for some strange reason some of the numbers don't add up the cube has 2 dim (month and Drivers in blue) the first member of Drivers (baseline) has only the value in the first month, while for driver "a" "b" "c" i can data entry after the first month my goal is to copy the…
-
Skipped rows of Cube value of 0
Hi guys, I have some issues that have skipped rows of Cube value of 0 but in Data Reader ETL is displayed well. I have unchecked Hide zeros and checked differentiate zero and null. Anyone have some ideas or solutions about this one? Thanks previously