-
how to delete capsule tile footer?
I would like to delete the capsule tile footer: how can i do this? The tile configurator doesn't show any button to delete the footer: If i go into the footer's layout and click on clear layout, then i cannot save the empty layout, Board sees this as an issue: Has anyone already met this issue? Which solution(s) exist(s)?…
-
B12, Module 306: Database Security, Settings are not clear documentated
Please have a look to the screenshot from Board Academy. In the third step "Set the second Cube to "SET- DE - Actual Months" and select the blue checkmark to save." This step is not matching to the screenshot below. The screenshot shows the "SET - DF - Actual Reporting Months". Maybe that was the problem for my earlier…
-
Level300_Module304: Functional test of bottom-up Planning
Hi, I just restarted the trainings environment from the scratch. I Made the preparations to upload bottom-up files, but have not done it. The existing data before uploading any bottom-up data include the values which should be uploaded with the bottom-up smart import already so functional test is useless. It would only…
-
Level 200, Module 204: Bug with Refresh Screen within dynamic procedure
I am trying to do this step: Run the Procedure by pressing on the Label object in play mode Apply Dynamic Increase Label Object Set the "Country" selector on the screen to "United Kingdom". Select "Apply Dynamic Increase" to trigger the "BUD - Increase Sales Budget by Dynamic %" procedure. Validate the data calculated…
-
Level300_module 302_goofy Actual months in Planning Months Settings
Hi, I tried it now three times but I can not solve it on my own. I have edited the screen below and linked it to a new screen "Planning Months Settings". Here I defined FCST 3+9 as below Funny is if I enter design mode the months are allocated differently I do not know why it changes it, but when I leave design mode it…
-
Level300_Module304: Functional test, Question no 3, Values fall apart starting Aug '23
There was an error rendering this rich post.
-
Level300_Module 303: Step "Adjust Planning Data Model Procedures", Actual Months are wrong
Hi, I have an issue in this section. I have set the FCST 3+9 as the data entry version. And now I am in the step above. In the Forecast group I shall add a step after 15 as below I would assume that Actual months and period <>0 should be three as FCST 3+9 is defined, but I always get nine. This is the same issue why I have…
-
Level300_Module 303: Step "Adjust Planning Data Model Procedures", Actual Months are wrong
Hi, I have an issue in this section. I have set the FCST 3+9 as the data entry version. And now I am in the step above. In the Forecast group I shall add a step after 15 as below I would assume that Actual months and period <>0 should be three as FCST 3+9 is defined, but I always get nine. This is the same issue why I have…
-
Level300_Module 303: Step "Adjust Planning Data Model Procedures", Actual Months are wrong
Hi, I have an issue in this section. I have set the FCST 3+9 as the data entry version. And now I am in the step above. In the Forecast group I shall add a step after 15 as below I would assume that Actual months and period <>0 should be three as FCST 3+9 is defined, but I always get nine. This is the same issue why I have…
-
Dynamic Header - QuickLayout appearence
At the Qick-Layout View of a DataView, its showing the code an not the column names like in the DataView:
-
Container with Expand/Collaps function (Pin/Unpin) to increase screen capacity
Hi all, I received a requirement from a client to be able to hide and unhide the area which usually includes selectors/pagers/procedure buttons. Often times solutions have a vertical or horizontal pane which includes selections and procedure. The client requested me to build a function that this pane can be hidden on…
-
I am getting two missimg errors in the relationship part
please help me with this, how can i correct this
-
Varying entity formatting, in Block Format, per column within a single DataView
As the title notes, we are requesting more flexible varying entity formatting options in the Block Format, including the ability to format individual columns and customize total borders. An example of the need: Having the ability to edit total borders. There are only cell/column borders.
-
When download files from blob cubes random names file generated
Hi team, We found a issue in blob cube downloaded files. Whenever download upload file from blob cube it downloaded with any rendom name like Example "zefghtswftsgg" We need a way how to fix this, if any configuration needs to correct ?
-
In RTF cubes table boarder not working
Hi team, We’re facing an issue with extracting specific RTF data in table format — the table borders aren’t being captured, even when we paste the content. Will the latest version include support for extracting tables (with borders) from RTF cubes? or any workaround?
-
200: module 203, Section 11ff, Data reader for Data Cubes is not working
Hi, I have set up the data cubes in Section 11 and 12 and when I added the data reader in section 13 I made an mistake by adding only the 5 entities from screenshot to the reader, leaving out cube data fields. In Section 14 I noticed I do not have data in my cubes, even when the reader said it had loaded it. I found the…
-
B14 Level 200: module 203, Section 11 to 13
Hi, I have set upped the Cubes and the data reader but when I run the reader nothing happens. At first I have build the reader analog screenshot and the two cube values were missing (unit and sales LC). Before the fix the reader worked fine but I did not had data shown in section 14. So I went back and noticed my failure.…
-
How can we do seasonal forecasting and trend analysis by using the predictive power of Board
I want a detail steps , how can we do seasonal forecasting and trend based in the Board Platform apart from BEAM.
-
Closer integration between Board Data Models
With the concept of applications or solutions leveraging a more "modular" data model approach, an idea I would have is closer integration of multiple Board data models. A simple example would be an FPA Planning model with an HR planning module. In this example I could see two different data models: Data model which…
-
Enable Dynamic Resolution of @Week in Algorithm Names When Using Block Reference in Data Views
When creating a Data View with block references, dynamic naming using @Week does not currently work as expected . For example: Setup: Data Block A: Block reference to Week 31 Data Block B: Block reference to Quantity for Week 31 Algorithm Block C: Calculates A / B with a block reference to Week 31 and is named Price@Week…
-
The ability to apply border styling to “Total” and “Grand Total” rows in a DataView
The ability to apply border styling specifically to “Total” and “Grand Total” rows is a highly sought after feature for proper report presentations. It is not currently available in Dataviews. This is an enhancement that is currently desired by several customers for their reporting requirements and is being asked for…
-
Improvement of text data entry saving in DataView when using an RTF cube
As the title implies; improved text data entry saving in DataView. Please add a “Save” option within the text editor to allow saving without closing it. When using an RTF cube for text data entry in a DataView, users currently need to close the text editor and use the sliding toolbar to save changes. It would enhance the…
-
Best Practices for Deleting "Test" Objects (Screens, Procedures, Entities, etc.)?
Hello, I’ve heard the advice many times to “never delete anything” in Board, but as our snapshots keep growing, I’m starting to question if that’s really the best approach for managing old “test” objects, screens, procedures, entities, and so on. I’m especially interested in how others handle the accumulation of test…
-
corporate identity: add custom color palette, custom chart color theme, pin recent color
Hello, My idea is to develop further the implementation of the corporate identity in Board capsules. The screens' mask is already very helpful. The colors management could be improved. It is currently not possible to apply brand colors in charts for example. Current color features Currently, Board provides: a standard…
-
Option to replace blanks or zero's with dash "-" in data views
Hi Team, It would be ideal if we had the option to replace blanks or zero's with a dash "-" in Data views. This would support reporting requirements for our government customers. In the entity row formatting and data view block formatting, we need an option to replace blanks and/or zero's with a dash "-". Something similar…
-
Option to replace blanks or zero's with dash "-" in data views
Hi Team, It would be ideal if we had the option to replace blanks or zero's with a dash "-" in Data views. This would support reporting requirements for our government customers. In the entity row formatting and data view block formatting, we need an option to replace blanks and/or zero's with a dash "-". Something similar…
-
FlexGrid - fix the problem where when you scroll right, some column titles disappear
We have a lot of columns, there are some initially off-screen. When I scroll right, there are gaps. This seems to be a display issue. Re-enter the screen and it often clears up. But please fix this.
-
Level 300: module 309: Technical error not able to submit the functional test options
I have selected the options but not able to submit the functional test answer. Please help me with this matter. I tried several times. submit the functional test answer. Please help me with this matter
-
level 300; Module 309: Not able to submit the functional test answer
If I try choosing these two options and submit ,it is not yet all responding but if i choose other options it is responding with incorrect, Please help me with this issue
-
B14 Level 200, Training Instances
I'm continuing my Board Lesson Journey on B14 Level 200 part 1. But, when the training instance set up done, there are no data models. It just show only 1 screen on the capsule. Know I stuck on Module 202, since I need to learn about B14, any suggestion to get this done?