-
Exporting Quick Layout charts or showing the Chart Data
Hi, is there a none issue exporting charts with an adjusted Layout - through quick layout? It gives me always the dimensions of the original setup. I changed the chart axis from months to quarter however the Data chart is still considered with the setup axis - month Br,MAik
-
5 Tips for a Successful Board Setup
Author: Karry Schupp, Senior Financial Analyst for DH Pace Company and Community Captain. The setup process for Board can be daunting. Board and your Partners are relied upon extensively during the setup process; however, they only understand your expectations based on your communication with them. After experiencing the…
-
Flex Grid
Hi, When I hide block D and E i am receiving the issue message: I didn't configure anything by column. I am not sure what it actually means. Any thoughts? Btw. Is there a way to add Tags? I can imagine it is beneficial for others when searching for Flexgrid in the community - but it doesn't exists. Thanks, Maik
-
Selection by a cube
Hi, I have a screen selection by a cube. When I do another selection on the same hierarchy / relationship it removes the cube selection. Hotel is part of a country I select through a cube all active hotels. When I now select only some countries it shows inactive and active hotels because the cube selection has been…
-
General Question: Can the way of concanate be chosen somewhere?
Hi, if you choose that you want code and description be shown both together they are always linked with a " " but can this be editted somewhere? I would prefer to have them linked via "_" for example.
-
B14: level 303_Question about Label "@Selection"
Hi, I have a general question about the mechanic of Label objects and the "@Selection" caption. As recommanded during the lesson if I use the dynamic selection of "version status" the "version" will be selected analog settings in administration screen. If I add a label and use caption @selection, it shows only those…
-
B12: module 302_Setting up Actual Reporting Months via Data Entry not possible
Hi, in this run of Level 300, Part 1 I face the issue, that it is not possible for me to set the "Actual Reporting Months" via Data Entry in Data View Object. Even if I enable Data Entry the column does not become yellow and clicking the checkbox does not work at all. Any idea how that could happen?
-
Incorrect values
I am building a solution in the board platform, I have set up the procedures correctly taking cargo previous year multiply with growth factor and target should populate the result but the result is incorrect the values are not correct. the growth factor is 10 Why is the value is incorrect?
-
i am building a solution in board i am not able to populate the data in the datareader
i am not able to view the source and file and run the data reader, i have attached all the screenshots please help me with this.
-
how to delete capsule tile footer?
I would like to delete the capsule tile footer: how can i do this? The tile configurator doesn't show any button to delete the footer: If i go into the footer's layout and click on clear layout, then i cannot save the empty layout, Board sees this as an issue: Has anyone already met this issue? Which solution(s) exist(s)?…
-
B12, Module 306: Database Security, Settings are not clear documentated
Please have a look to the screenshot from Board Academy. In the third step "Set the second Cube to "SET- DE - Actual Months" and select the blue checkmark to save." This step is not matching to the screenshot below. The screenshot shows the "SET - DF - Actual Reporting Months". Maybe that was the problem for my earlier…
-
Level300_Module304: Functional test of bottom-up Planning
Hi, I just restarted the trainings environment from the scratch. I Made the preparations to upload bottom-up files, but have not done it. The existing data before uploading any bottom-up data include the values which should be uploaded with the bottom-up smart import already so functional test is useless. It would only…
-
Level 200, Module 204: Bug with Refresh Screen within dynamic procedure
I am trying to do this step: Run the Procedure by pressing on the Label object in play mode Apply Dynamic Increase Label Object Set the "Country" selector on the screen to "United Kingdom". Select "Apply Dynamic Increase" to trigger the "BUD - Increase Sales Budget by Dynamic %" procedure. Validate the data calculated…
-
Level300_module 302_goofy Actual months in Planning Months Settings
Hi, I tried it now three times but I can not solve it on my own. I have edited the screen below and linked it to a new screen "Planning Months Settings". Here I defined FCST 3+9 as below Funny is if I enter design mode the months are allocated differently I do not know why it changes it, but when I leave design mode it…
-
Level300_Module304: Functional test, Question no 3, Values fall apart starting Aug '23
Hi, I noticed that there is a mismatch between the P&L structure in trainings environment and the board academy module 304 functional test. The question is And this is the screenshot which you should meet: Values are matching Jan to Jul '23 but fall apart after. I have checked and the Total income is fine for the whole…
-
Level300_Module 303: Step "Adjust Planning Data Model Procedures", Actual Months are wrong
Hi, I have an issue in this section. I have set the FCST 3+9 as the data entry version. And now I am in the step above. In the Forecast group I shall add a step after 15 as below I would assume that Actual months and period <>0 should be three as FCST 3+9 is defined, but I always get nine. This is the same issue why I have…
-
Level300_Module 303: Step "Adjust Planning Data Model Procedures", Actual Months are wrong
Hi, I have an issue in this section. I have set the FCST 3+9 as the data entry version. And now I am in the step above. In the Forecast group I shall add a step after 15 as below I would assume that Actual months and period <>0 should be three as FCST 3+9 is defined, but I always get nine. This is the same issue why I have…
-
Level300_Module 303: Step "Adjust Planning Data Model Procedures", Actual Months are wrong
Hi, I have an issue in this section. I have set the FCST 3+9 as the data entry version. And now I am in the step above. In the Forecast group I shall add a step after 15 as below I would assume that Actual months and period <>0 should be three as FCST 3+9 is defined, but I always get nine. This is the same issue why I have…
-
I am getting two missimg errors in the relationship part
please help me with this, how can i correct this
-
When download files from blob cubes random names file generated
Hi team, We found a issue in blob cube downloaded files. Whenever download upload file from blob cube it downloaded with any rendom name like Example "zefghtswftsgg" We need a way how to fix this, if any configuration needs to correct ?
-
In RTF cubes table boarder not working
Hi team, We’re facing an issue with extracting specific RTF data in table format — the table borders aren’t being captured, even when we paste the content. Will the latest version include support for extracting tables (with borders) from RTF cubes? or any workaround?
-
200: module 203, Section 11ff, Data reader for Data Cubes is not working
Hi, I have set up the data cubes in Section 11 and 12 and when I added the data reader in section 13 I made an mistake by adding only the 5 entities from screenshot to the reader, leaving out cube data fields. In Section 14 I noticed I do not have data in my cubes, even when the reader said it had loaded it. I found the…
-
B14 Level 200: module 203, Section 11 to 13
Hi, I have set upped the Cubes and the data reader but when I run the reader nothing happens. At first I have build the reader analog screenshot and the two cube values were missing (unit and sales LC). Before the fix the reader worked fine but I did not had data shown in section 14. So I went back and noticed my failure.…