-
Flex Grid Export
Hi there any idea when the speed of exporting a flex grid will be enhanced. It is very slow. Any thoughts how to get the exporting job done maybe in a different way? Thanks maik
-
Missing Ctrl+F functionality with in the Dataview.
The user needs to highlight the searched item with in the data view by using ctrl+f functionality. we don't see this functionality in Board14. User experience is effecting without this functionality. could you please make a note of this idea and try to add in upcoming versions.
-
Ability to Refresh Data within a drill down
The ability to only refresh data in procedures and on screens is great however it is a small pet peeve of mine that if you have a drill down window open you have to close the drill > refresh data > re-drill. It would be a great feature if you could refresh the data within the drill down windown. Use case: Quite often I…
-
Enable Draggable Field Mappings in Data Reader
Use case: When configuring fields in a data reader, it's not uncommon to forget a field (e.g., Customer Description in Screenshot 1 below), or the data structure may evolve, introducing new fields or changes in hierarchy over time. Currently, if a field needs to be added or repositioned, users must clear all existing…
-
Print export should consider selected tab
It's great that you can add a screen to a presentation multiple times and select a different tab of the container object each time. However, the printout does not take this tab selection into account, but always prints only the first tab if the print area contains objects other than just the tab container object. It would…
-
SCIM/SAML Provisioning No Longer Updating Users Automatically
To successfully update a user's access in the Board Application by replacing their existing AD group with a new one. The following steps are followed. Step-by-Step Process 1. Remove Existing AD Group • Sync to Microsoft Entra ID occurs within 15 minutes. • The SCIM provisioning job, which runs every 40 minutes, updates the…
-
Multiple position selection in Menu Object
Hi all, it would be great to have a multiple position selections in the Menu Object. That would allow us to combine different positions (folders) within one Menu Object. Feel free to reach out if you have any further questions. Kind regards, Atilla
-
Problems with Sparsity Optimization
Are there known issues with the sparsity optimization in BOARD. We carried out a sparsity optimization and afterwards the entries of the cubes (before the optimization and after) no longer matched.
-
PDF Export of Entire Data View
When exporting a data view with multiple rows that require scrolling, all rows should be included automatically in the PDF export. Currently, the workaround requires selecting the data view as a separate print area, which creates a page break between areas in the PDF.
-
Export to Excel - Group By Entities on Flexgrid
Currently, when entities are added to the "Row Group" interface of the Flexgrid object, the entites are shown on the screen as expected. However, when a Flexgrid is exported to Excel (with flattening applied), the "Row Grouped" entites are not on the exported screen by default. By default, when an entity is added to the…
-
Is it possible to use an RTF cube as the body for a Broadcast email?
Hi! I'm working on a Broadcasting module for a solution and I'd like to let certain users create the body of their emails using data entry. I've always done this with text cubes in the past, but I was wondering if it was possible to do the same with an RTF cube - since the Body editor in the Broadcast area appears to…
-
Split&Splat functionality extension to even/repeated distribution
Hi, I wish to have the split&splat functionality broadened, so it is not only able to split values according to the existing proportions, but have the ability to repeat the value, or to spread it evenly onto all leaf elements that are open for data entry. It would be excellent if developers could set what kind of…
-
Adding Percentage % option for data label in Waterfall chart
Hi BOARD Team, When we use waterfall chart, we can only display deviation in numbers. But we cannot add Percentage. Can we have selection to show number, percentage and both when using waterfall chart? Thanks
-
Align the behavior of smart import error messages for the two types of import
Hi, I would like to suggest a possible improvement for the smart import object. As for now, if I import data copying and pasting from an excel file, I see detailed error message with the causes of any errors, also highlighting the cells where problems were found (example below). If I import directly an excel file, instead,…
-
Scale numbers in graphs correctly
Hello, Currently when numbers scaling in used in graphs (for example, show M for millions), the scaling is only applied to the plot area, so, when you hover over a graph. However, by logic it should apply to the whole graph, including the axis. Please accept this idea to improve customer experience.
-
Preventing Split & Splat on Near-Zero values
The issue The current split and splat functionality in Board EPM offers valuable flexibility for data entry at various aggregation levels. However, it can introduce significant errors and instability when applied to aggregated values that are near zero, particularly when negative values are present in the underlying cube.…
-
Blank Space Utilization/Sizing
There is often unused space in the layout editor and data readers. For example, in the layout editor, the Alignment section's selector spans the entire screen, whereas in the Rules section, the selector is much smaller. This inconsistency makes it difficult to view selected items, as they can be cut off or partially hidden.
-
upload for all file types in Blob cube & download file using button
There should be option to upload multiple types of files in a blob cube
-
Export full presentation to Excel instead of slide by slide
Hi Community, Does Board allow us to export a full presentation (presentation menu) to Excel instead of doing this slide by slide? Is there any options or button to apply for this? I would really appreciate that it is possible, and know how. Thanks a lot in advance for your attention. Regards.
-
Restore Two-Tone Panels for Better Visual Clarity
I believe Board developers would all benefit for Board to go back to it's two tone color design (grey background, white foreground) on popups/side panels in the design mode. It is much harder to differentiate buttons and sections in these respected areas.
-
💡 Feature Idea: Enable Tooltip Compatibility with 'Detail By'
Hello Community Currently, when using the tooltip feature together with the 'Detail by' option, the tooltip only appears on the total row, not on the individual detailed rows. 👉 Interestingly, when the entity is placed by columns, the tooltip works as expected and displays correctly for each column value. It would be great…
-
Introduce a "Mini Map" View in Procedures
Problem : When working on long and complex procedures in Board, it's easy to get lost navigating between multiple steps, loops, and conditional blocks. The current linear view makes it hard to maintain an overall understanding of the structure, especially for debugging or reviewing purposes. Suggested Feature: Add a Mini…
-
New eLearning: Getting Started with Board Signals for Customers
We’re excited to announce the launch of a new eLearning experience: Getting Started with Board Signals for Customers. This training is designed to empower learners with the knowledge and tools they need to confidently apply external market insights to real-world planning and decision-making. Whether your role involves…
-
New eLearning: Getting Started with Board Foresight for Customers
We’re excited to announce the launch of a new eLearning course: Getting Started with Board Foresight for Customers. This course is designed to empower learners with the knowledge and tools they need to confidently integrate external economic data into planning processes and drive data-informed business decisions. Whether…
-
Save selection to cube
Hi all, I'm investigating possibilities to save arbitrary selections (see post linked below) but I find that even if I can manage to save them to a text cube, it is impossible to "restore" them when needed in the context of a maintenance interface. However, it is possible in the context of a procedure, to save the current…
-
Enable Data Entry Validation Rules Based on Other Dataview Blocks
Hello Community, Currently, data entry validation rules in Board are limited to conditions within the same data entry block. This limits our ability to implement advanced validation scenarios that depend on other layout blocks. I propose adding the capability to define validation rules that reference values from other…
-
Add an comment field for each block inside a Layout
Hi Community, I would like to suggest a new feature for Layouts in Board: the ability to add comments to each bloc 🎯 Purpose: This would help developers document the purpose or logic behind each bloc directly in the Layout, without needing external documentation or complex naming conventions. The comment would be visible…
-
Alternative to "Feed" for Banner Communications in On-Prem Version?
Hello everyone, We are currently looking into the feature called Feed, which is intended for banner communications (e.g., displaying important messages from administrators to end-users, deploy notes etc). According to the this link Feed , this feature is available in the cloud version of the system. We are running the…
-
Display Cube Dimensions in Dynamic Selection
Hello Board Team, I’d like to suggest a UX improvement for screens that use dynamic selections based on a cube. 👉 Current limitation: When using a dynamic selection linked to a cube, it’s currently not possible to see which dimensions (entities) are used in that cube from the screen configuration. This makes it harder to…