-
Level 200. Modul 209: The values are not matching, can you help me with this about the mistake
-
Offset Rules
1. Abstract Offset rules are a type of rule which allow you to reference multiple blocks in the same layout as part of your calculation, they can be very powerful but should be used with caution. 2. Context Offset rules can be very powerful in certain circumstances but should be used with caution due to the complexity they…
-
Capsule Procedure vs Datamodel Procedure
1. Abstract While developers are facing procedure creation, they need to understand when it is appropriate to use data model procedures vs Capsule procedures. 2. Context As developers, it is our responsibility to always keep the long-term maintainability of our solutions in mind. Procedures must be developed in a…
-
Level 300, Module 306 Functional question 2 problem
Unable to enter data in Indirect Global Expense Planning template. Cube used in the template I enabled the Data Entry. Can please help me in this
-
Day entity in a dataview displaying in American Format
Hi Community, I am using V14.3 and have an issue with the Day entity displaying in American format when used in a dataview. When you view the day entity in the time range it is displaying in Australian date format. If you extract the tree and view the Day entity it is displaying in Australian date format. However, when you…
-
Data Block Visibility in Dataview
Is there another way of forcing a Data Block in a Dataview to be always shown even if it has no value apart from checking the "Show all" in Axes?
-
Can the entity of the rule be a parent of a cube structure entity for rule consolidation?
When trying to consolidate and store the rule into a cube (CUBE A) I running into issues. Based on the documentation I followed appropriate steps: setup a temporary cube and then used it in a dataflow TEMP = a (where block a is CUBE A with rule applied). I then run a second dataflow to flow TEMP back into CUBE A. The rule…
-
B14 204: Section 3
Per the training screenshot the total count for Salesperson should be 122, but mine shows 128. I am not sure how to fix this.
-
Algorithm - limit for length ?
Hello colleagues, are you aware of any limitation for algorithm in data view ? How long could it be ? thanks, Peter
-
edit scrollbar for Selection pop-up window
Hi there, Where can we edit the scrollbar size and color for the Selection data pop-up window? Thanks, Feisha
-
Optimize Your Community Experience
Getting the most out of your Board Community experience means knowing when new discussions are posted, new questions are answered, and added information is ready for viewing. Category Following and Custom Notification Preferences will help you get started! Stay Informed, Effortlessly When you follow categories, you choose…
-
Level 200: Module 206 Default Entities (Select budget version)
On the "Sales Planning" screen, when I open the Toolbar menu and then the "Select" panel, I can't find the "Version" entry.
-
Level 200: Module 206; CY Budget on Sales Planning Screen
On the "Sales Planning" screen, when I run procedure to initialize the budget, no data is populated in the "CY Budget" item. I have reviewed related inquiries, but the issue remains unresolved on my end. I would greatly appreciate any help or guidance. Data View configure layout Capsule procedure Data model procedure…
-
Please extend the level 300 part 1 training environment.
Dear team, Thanks for you, the level 300 part 1 training environment was extend by 1st October 2025. But, I can't complete it due to the time constraints because of my job using "Board". I would like to extend the instance to complete the level 300 part 1 training. Would you extend my level 300 part 1 instance? Best regards
-
September CommunityCast and Badge Opportunity
⛅️ Fall is just around the corner so make sure to enjoy those remaining sunny days! The Community team has some fun updates so check them out in the video below. Here are your one-minute, Community updates this month: Thanks to August's participants, we loved reading about your vacation destinations. @Helmut Heimann, @Nico…
-
Smart import object limit
Hi, We have appreciated a reduction of the max number of rows that can be loaded using the Smart Import Object. Before we could load up to 35k rows and now it seems the maximum is 10K. Is there a way to increase this limit? 10k rows is not enough for us. BR
-
Request to Extend Instance Validity Period
Hello. I'm studying Board Developer Path Lv.200 now. But, the instance used for training will expire on October 3, 2025. I would like to keep using it for studying Board. So, is it possible to extend the instance's validity period? Best regards.
-
Rename Capsule or Rename Foldernames
Hi everybody, does anyone have experiences what i have to consider by changing the names of a Capsule or Foldernames? Are Presentations still workung i.e. the Broadcasting of Presentations and so on?
-
Loading Speed Flex Grid
Hi, are there any plans to work on the loading speed of a flex grid? When i load the same data into a dataview it works fairly quick however when i do the same in flex grid it takes minimum 2 minutes + to load. Br, Maik
-
Level 200, General Issue: Data Views are empty
Hello, I am currently completing the Level 200 training course. I am currently on Module 214 (Sales Report), but I don't think that is relevant to my problem. The problem I am having is that none of my data views are displaying anything on any of the screens I have created so far. All other graphics (pie charts, Cartesian…
-
Level 200 - Training environment expired
Hi, I was not able to complete level 200 training due to other commitments and different assignments from company. I really would like to restart it to complete the training however I got the message on the page that the course is expired. Is it possible to reset the training environment. Thank you.
-
Level 300 Part 2 - 308 Functional Test
Hello Team, Im facing issue in completing Functional test - Ques 9, change the User to EMEA Approver role. Navigate to Sales planning adjustment screen and select the countries. After changing role it does not allow me to go to screen and gives the error message as "Access denied. you are not allowed to access this…
-
216 Section 14: Build Revenue by City Pie Chart
Hi - so after creating this pie chart, it displays the split by city accordingly, but is the split based on GBP revenue? That's the logical way to show this, but how does it know to display it appropriately by using the GBP revenue (data block a) rather than LC revenue, when both countries Italy and UK are selected? I…
-
Board Impact Analysis: A Powerful Developer Tool
Author: Bart Scott, Board Developer at CFO Solutions LLC and Community Captain Board Impact Analysis is a very powerful tool that can be used to assess impacts of proposed changes as well as help in debugging, when used properly. There are two different areas you can utilize the Impact Analysis within Board. Only Developer…
-
Flexgrid Headers
How can we remove these annoying aggregation functions indication from the Flexgrid Headers? It makes it impossible to fit columns to the needed width without making the header unreadable. I would also be fine with the possibility to wrap the header text. Moreover, the possibility to use @Selection in the header has…
-
Flexgrid order columns
Hi any idea how to cluster all columns by year? It doesn't work for the calculated column for all years. Thanks Maik
-
Board 14 Dates in Dataviews
We are currently in the middle of testing board 14 before upgrading and one of the things that users have raised multiple times is that they can no longer type or copy paste dates into the cell. This is really annoying as it forces you to use the calendar which significantly slows down data entry. Has anyone else…
-
How to set up a 4-4-5 calendar
*NEW—includes video demonstration. Build Along with Board Follow along as we provide a demonstration to further illustrate the basic principles shared here. Please note the recorded example may vary slightly from the written example, providing an alternative approach to the 4-4-5 calendar. 1. Abstract Board offers the…
-
B14 216: Section 1, step 6 - 8
Click on [...] at the right end of the "Currency" Entity to apply a dynamic selection based on a Cube. Select the "ACT - DF - Profit and Loss Statement LC" Cube from the drop-down "Cubes" list. Can I get some help understanding the logic here? What exactly is a dynamic selection doing using that P&L LC cube? What is it…
-
Can someone please extend my Board training instance? The person responding doesn't follow through
I keep on getting this everyday and I've asked multiple times for someone to extend my Board training instance. @Gavin Murray keeps on responding but hasn't followed through. Please just extend my Board training instance by 20 days. Please refrain from telling me to not worry until after it has been extended please.…