-
Scale numbers in graphs correctly
Hello, Currently when numbers scaling in used in graphs (for example, show M for millions), the scaling is only applied to the plot area, so, when you hover over a graph. However, by logic it should apply to the whole graph, including the axis. Please accept this idea to improve customer experience.
-
Blank Space Utilization/Sizing
There is often unused space in the layout editor and data readers. For example, in the layout editor, the Alignment section's selector spans the entire screen, whereas in the Rules section, the selector is much smaller. This inconsistency makes it difficult to view selected items, as they can be cut off or partially hidden.
-
Restore Two-Tone Panels for Better Visual Clarity
I believe Board developers would all benefit for Board to go back to it's two tone color design (grey background, white foreground) on popups/side panels in the design mode. It is much harder to differentiate buttons and sections in these respected areas.
-
How to create bar chart in Data View
1. Abstract This article describes a specific use case: visualizing a bar chart in a data view object. 2. Context In some projects, it can be asked to render a bar chart in a data view object, to provide an immediate visual representation of the numerical values directly in line with the data. This allows users to more…
-
Flex Grid header colors
G'morning all, Previously, I was able to have different background colors on a Flex Grid header so that text input to the filter box in each column is visible (first screenshot). Now, the header background is only one color which isn't helpful when a user inputs text to filter. Yes, I have matched all colors between the…
-
💡 Feature Idea: Enable Tooltip Compatibility with 'Detail By'
Hello Community Currently, when using the tooltip feature together with the 'Detail by' option, the tooltip only appears on the total row, not on the individual detailed rows. 👉 Interestingly, when the entity is placed by columns, the tooltip works as expected and displays correctly for each column value. It would be great…
-
Waterfall Chart
Hi Team, I have created a waterfall chart as shown below. The end user would like to display both the values and the percentages. However, I haven’t found any settings that allow both to be shown simultaneously. I attempted to use the Tooltip feature to display the percentages, but that didn’t work either. Is there a way…
-
Safe more than just one "MyView"s per Screen
It would be very helpfull, to save more than just one View per Screen
-
Alternative to "Feed" for Banner Communications in On-Prem Version?
Hello everyone, We are currently looking into the feature called Feed, which is intended for banner communications (e.g., displaying important messages from administrators to end-users, deploy notes etc). According to the this link Feed , this feature is available in the cloud version of the system. We are running the…
-
Display Cube Dimensions in Dynamic Selection
Hello Board Team, I’d like to suggest a UX improvement for screens that use dynamic selections based on a cube. 👉 Current limitation: When using a dynamic selection linked to a cube, it’s currently not possible to see which dimensions (entities) are used in that cube from the screen configuration. This makes it harder to…
-
Level 200 Module 205 Missing editing options in Data Management screen
Hi everyone, I’m having an issue when working in Board’s Data Management screen. Although I’m in Edit Mode (it says so in the upper bar), I don’t see the usual editing options like labels, selectors, buttons, etc., on the left-hand side. However, when I go to the Home screen, these options are visible and available. I’ve…
-
How to Group Columns by Cube in Data View Layout
Hi everyone, I have question about data blocks Detail by Month As shown in the attached screenshots, the columns for Q Ovun (PO) and Q Ovun (GR) in the Data View are currently sorted by month, which results in an alternating pattern (e.g., Q Ovun (PO) Apr.25, Q Ovun (GR) Apr.25, Q Ovun (PO) May.25, Q Ovun (GR) May.25,…
-
No transfer of selections made in play mode into design mode without having been asked
Other than in the versions before, Board 14 transfers temporary selections done in the play mode automatically to design mode when switching to design mode. This very quickly leads to the screen being saved incorrectly (with the wrong standard selection) if you are not very careful. And this results in a lot of extra work…
-
Upgrade/Migration tool
Hello team, I expect to be considered enhancement of a tool to reduce the workload involved in verifying/testing after the version upgrade. The desired functionality includes exporting and comparing positional information and setting values displayed on the screen. If it is difficult to provide comparison feature, using a…
-
Selecting Months for Single Month & Multiple Month graphics
I am trying to set up a screen that uses a single month selection for a waterfall chart and multiple months for a graph of monthly figures. I have managed to get a procedure that selects the last twelve months, however I could not use this selection alongside the waterfall chart. I have tried using a custom time entity but…
-
Adding Blank Rows that Mesh with Block Format
Hello! I'm working to enhance our current P&L report to improve vertical readability. I'm doing this by adding "Blank" members to the entity used in the by row configuration underneath key metric milestones (ex: Total Rev, Total COS, GP, etc.) No problems there; However, the formatting is clashing with block format since…
-
Dynamic Selection on a Layout
Hello everybody, I'm using Board 14.1 and I have a question concerning the dynamic selection. I have 2 flex grid in 2 tabs on my screen and I would like to make a dynamic selection on these 2 flex grid. A dynamic selection on the screen is not an option because the dynamic selection for the 2 flex grid is different. Thank…
-
Show/Hide Column Dataview like drill down rows?
I want to know that how can I show/hide column Dataview like drill down rows like this picture below. Anyone have an idea?
-
Calendar Bug Issue ?
I have found some issues about calendar component like this captures : When I have just dragged it into the screen, the Data properties was disabled suddenly. Do you have an idea about this?
-
Numbered Axis
Is there a way to number the axis similar to an excel spreadsheet? Maybe I am missing something, but I cannot find any details on this in the reference manual or on here.
-
Enable Master Object at the Containers Level (Tab or Panel)
Hi everyone, Currently, the Master Object option in Board is available only at the screen level. While this works well in many cases, I believe it would be more powerful and flexible if we could define a Master Object at the container level, such as within a Tab container or Panel container. If we could assign a local…
-
Tab container object - Orientation
IDEA: There must be an option to change the Tab container object orientation from Horizontal tabs to Vertical tabs. Vertical tabs will appear on the left side rather than the top. USE: This will help those developers who want to use fewer selectors horizontally and want a large number of tabs horizontally.
-
Carpal Tunnel Syndrome from Board 14's Excessive Mouse Clicking
I find that Board 14 requires a copious number of mouse clicks, from selecting a dataview within a tab, to saving a procedure. May I suggest: Administrators can turn off warnings while they develop; such as "Are you sure you want to delete", "by editing dimensions the cube will be cleared". Ability to select multiple lines…
-
Allow Deleting Folders with Screens + Multi-Screen Selection for Delete
I'd like to suggest an enhancement to improve screen and folder management in Board. Currently: It is not possible to delete a folder if it contains screens. Screens can only be deleted one by one, which becomes inefficient when working with many items. Here are two improvements that would really help: Allow deleting a…
-
Possibility to apply selection in "Export screen data to xlsx" procedure step
When a procedure is triggered from Screen A to export layouts from Screen B, there is currently no way to apply a selection on Screen B to export a filtered dataset. It would be very helpful if the "Export screen data to XLSX" step could optionally inherit the selection that is active in the procedure. We are using this…
-
Gauge marker
Hi team, the marker in the screenshot below is in the wrong position, i.e. 39.6% remaining spend should be in the grey section rather than green. Would be grateful for any help to fix this, thanks.
-
Enable "Flatten groups level" option for End Users in Data Views
Make the "Flatten groups level" option available to end users via a dropdown menu to select the starting entity for flattening.
-
Apply number scaling to charts axis
Our customer uses the new Number Scaling functionality in graphs—cartesian charts (B14.2). They expect the scaling to be applied not only to the values in a data view but also to be reflected on the Y-axis. In the example below, in Number Scaling, the option Millions is selected, so in addition to the updated labels of…
-
Substitution variable for chart objects
Hi, There is a limitation in current setup which restricts use of Substitution variables like @Selection, @Months in chart objects. The same works with data view. Can you please enable this for chart objects as well
-
How to disable on Alert formatting on Total row
Hi BOARD Team, I applied COLOR ALERT on a data block. It works fine on each row. However, it is impacting the number showing in the row total. Anyway I can force the row total as BLACK? Thanks