-
There is anyway to hide and display the cubes in the dataview on the screen based on selection
i want to know is there any method to show only particular cubes in the dataview layout for few selection and display all the cubes in the layout for rest of the selection, that too in a single screen.
-
Board 11.1: How to use check box in block appearence in a dataview?
The checkbox wasn't working on board 11 or am I using it improperly? Found answer the cubes were not syncronous, my mistake.
-
Down Totals and disappearing dataview
Has anyone out there experienced the issue shown below (in 10.5.0) or able to explain what might be causing it? I'm displaying a single mapping cube, with data entry enabled, and axes set as below With DownTotals checked it shows fine Turn off 'Down Totals' as they're not needed/wanted with a mapping cube. ..and then…
-
Disable Data Entry on Grand Totals
Hi Boardville, quick question, couldn't find the answer in the search. How do I disable data entry on the Grand Totals? Best Mathias
-
when a user gets logged into the capsule and close it and immediately second user connects to the sa
both users connect to the same capsule with different credentials but with a single client, both log in to the application one after the other.
-
Dataview Drill down no value / show all
Hello together I have a dataview with 4 cubes and 1 of the cubes is a budget cube which has just some Basic entities. If I show the new data on a high level everthing looks fine: But if I drill down for example on the age (it is a entity that the budgeting Cube doesnt know) the result looks like this: The grey marked rows…
-
How can I compare Cube versions which don't align?
I have a large cube (~23mb), which due to it's size and use we have set up 7 versions. I have an issue where Aligning is not actually aligning call versions. Version 1 is ending up slightly different to Versions 2-7. I'm trying to compare V1 and V2 to hopefully work out where the issue is. The problem I have is that the…
-
Design of a waterfall chart ?
Hi Guys, I’m struggling with the design of the following waterfall (cf. image attached). It has been done with Excel, and I’d like to do the same in Board, but haven’t found yet how to do it. So basically, on the right of the chart I have the group cumulated turnover for January 2016 to Month M 2016 and on the left its…
-
Chart type bar / display data from the y axes on the top of the bars
Hello all, we are working with the Windows Client V.10.1.4. I create a Chart from the Chart type Bar. Now I will make the label from the turnover (from the Y Axes) on the top from the bars (see attachment). Where can I find the needed settings? Thanks in advanced Stefan
-
Documentation on REST API
Where can I find the documentation for the REST API? How-To with samples.
-
Web PDF Report - Not all pages show refreshed objects
Hello everyone, I am having some trouble with the new 10.3 web printing option. In general I really like the direction this is heading. But I am facing some issues when I try to print several printing areas. I have a folder container with several tabs, each tab has a "Panel" which is set to "Print as single Object". When I…
-
BOARD 11.1 - Dataflow not working
Dear all, we are migrating a database from 10.3 to 11.1 but dataflow do not work. We start to check this dataflow Net Sales (A) + Credit Notes (B) = Sales (C) A and B has these entities: Day, Document No, Order, Item C has these entities: Day, Customer, Order, Item Document No and Customer are into a relationship. All…
-
10.5 patch release
According to the latest patch release for 10.5 here .... "A malfunction on the Recent Documents on the Win Client has been fixed" I've advised our client to update for this fix, but it doesn't appear to be fixed as shown in the snips below.... It exists in recent documents But it still errors when clicking on it And it's…
-
Is there a way to get a grand grand total
Hi guys, I know there is the algorithm gt() in order to get the grand total of the subsection in a dataview but is there an option to get the overall grand total of the whole table? I have tried using nexel and can only get the very bottom down total annoyingly... (so close)! by using Point.Total. The issue arises as I…
-
Can I use a selection when extracting a cube?
Hiya, I'm pretty new to playing around with Board, so forgive me if this is a simple question. I've got a cube in one database with the dimensions of: Period, Branch, Category, GL and Scenario. I want to extract the cube, but only where there are values against Scenario 3, to copy into a cube in another database…
-
¿How publish Board 9.01 versión in WEB?
Hi, i need publish my capsules en WEB, i know is old versión but i hope can you help me. My version is 9.0.1 !! Thanks people
-
Substitution variables in Nexel formulas
To make the application more usable for end users, I would like to lookup a rate from a block in the dataview. It is not a show stopper as I have other ways of achieving the result I need. Either using a crossview or data picker functionality. For example: crossview example = [#Rates;@b;[@c;*;*];*] data picker example =…
-
What is the 'Data Entry Simulation' Option?
Hi, While looking at the screen properties in BOARD client, I cam across this option: Can anybody enlighten me as to what this does? Thanks, Stephen
-
What are the situations, during which board shows error " BOARD client is working in faulted state.
board was throwing the above error number of times, i was not able to find the reason for that error
-
Are there guidelines about when to ask a question of the Community and when to file a Help Desk requ
I'm wondering if these guidelines exist.
-
User Picture Board 10.5. Web HTML5
Hello together Actually I'm not able to ad an image to a profil of a user in Board 10.5. Does anyone know how I can add it? Or do we have to configure something on the server? Many thanks and kind regards Flavio
-
Procedures don't work
Hi all Again a problem with Board 11.. In Board 10.1.4. we had some procedures which calculates a target cube, since updating to Board 11 this procedure don't work anymore like it worked before. You can see that we'd like to calculate the last column, where we add some values and remove some values. But it only calculates…
-
Is drill-through limited to only 10 columns?
Of course, we need 11. Using Board 10.3.0 (prod) & 10.5.0 (dev) and when a drill through is defined ten empty "more" columns are shown and there doesn't seem to be a way to expand this.
-
10.3 Announced features missing?
From BoardVille 2018 it was clear that 10.3 was going to be an important milestone release leading to 10.5 and beyond. Now it has been released there are some great new features delivered, but there are also features that were promised that are not mentioned in the release notes. Notably: * Parallelism of data readers and…
-
WebClient: Change bar chart markers
Hello community, is it possible to change the rotation and position of the chart markers in web client of BOARD 10.5.1? They are just horizontal, in the bar and cover other bars in the Chart. Here is an example: 1: Standard rotation and position 2: Desired rotation and position Kind regards Jonas
-
Can I export an Entity row template?
Is it possible to export/migrate Entity row templates across Board environments e.g. from Dev to Production? Or to a replicate entity of the original? We have a KPI entity consisting of over 1000 different measures so it would be good to have a way of managing this other than backing up and restoring the entire database. I…
-
Migration to Board 10.5 Version
Hi Community, I am searching some informations about the process of migration to a Board 10.5 version from a Board 10.1 version. Does anyone have any experiences to share or a list of guidelines to follow? Could someone help me? Best regards, Luca
-
Can't access downloads
Hi, I am unable to view downloads in the board community portal. This is the error I get: Username: lasheenEmail: lasheen.lartey@brookes-scs.com I am looking to upgrade from Board 10.3 to 10.5.1, do I need a new license for this, or is it simply upgrading the install. Regards
-
Not able to download software !!!
I am not able to download even after changing my profile to customer. Thanks in advance for your help Regards Djega
-
SAP Connector Query Conversion Issue
Hi Community moving from SAP Connector version 2.30 to 3.3.11 a WHERE clause has not been properly coverted There is a query that have to import data up to today only and the syntax was PROMISE_DATEM1 < '#{ Datetime.Now.ToString("yyyyMMdd") }#' converting the query the date becames fixed PROMISE_DATEM1 < '20190628' If I…
