-
Get Current week/month
HI, How to get Current Week or Month on Algorithm?
-
Different Sceurity Profile depending on capsule
Hi everyone, in our board system we use different capsules and usually every user (apart from the admins) only has access to one capsule. We now have the special case that one user is supposed to have access to two capsules. The problem is that in one of the capsules he only is allowed to see data for one company and in…
-
Dataview display issues
Hi, I have a screen that fails to display any data when first opened. The first cube is the most complex and under details it says "unable to analyze this block". If I change this to another cube, press OK, then change it back to the original cube, the data displays correctly. So Board does not like the initial layout, but…
-
decimal bug on data entry
Hi board members, we use a single cube to enter distribution keys. In one example is just entered 0,24 and 0,76. After a refresh i got the following values: Same procedure works using 1,24 and 1,76. I there any explanation for this behavior? Best Paul
-
switching between the two versions of board 10.3.0 and 10.1.4
Hello Community, Well I have a problem switching between the two versions of board 10.3.0 and 10.1.4 I have capsules that can only be open with Board 10.3.0 and others with 10.1.4 and every time I have to work with a different version of board I delete the current version and install the needed one . is there any way to…
-
Validation rules on downtotal
Hello Citizens, i'd like to know if there is a way to apply a rule of validation on downtotal, for example the total quantity transported per day have to be 50. thank you!
-
Displaying similar points on a bubble chart
I am trying to plot some data on a bubble chart, and am having some issues trying to plot and display points that have identical results: The dataview here shows what I am plotting - and the points '11' and '16' are mostly hidden. I have tried here with different bubble sizes but the labels are still not visible. I am…
-
Export User Metadata
Dear Community, Is it possible to export user metadata (Users entity and Users Profile cube) by defining procedure (by extracting)? Do I need additional permission or definition to access user metadata? I will be grateful with your answers. Thank you.
-
new report functionality 10.3
I have some questions about the new report functionality at the browser interface. First of all, are there any advises except the release note 10.3? Is it possible to change the size of a chosen element? I only found out that’s possible to rearrange an element in order. If I choose a container with e.g. two dataviews,…
-
Presentation of percentages when values are near zero
Hello, We have a user who questioned a percentage calculation. Based on the filtering of her data she has current year sales of 136602 and prior year sales of -797 (due to some credits from 2016). The percent variance is -17,234% and although I have explained that it is mathematically correct she would prefer, I believe,…
-
Rolling Up Time Stamps into Hours
Greetings! My problem is this, I need to be able to track the number of records being entered into our system by Day and Hours. I currently am loading a cube from SQL that contains a Date/Time Stamp field. I am cubing off the Date by Day but need a way to delimit the Time Stamp and find a way to roll up these times into…
-
How to make a line chart show data for one data point?
I am currently building a screen with time selection labels that select different periods of time and apply this selection to the data on the screen. The time labels: TODAY, THIS WEEK etc. work as intended however there is one item on the screen that does not show data when the TODAY button is clicked. DAY is on the…
-
Total By on 1 dimension cube
Hello, My use case is as follow : In one screen some users mark members of a dimension using a cube with checkbox. In another screen, different users should see the percentile of member marked that represent the selection they made. Therefor, in one block I need to do a "Total By" to count how many member are marked…
-
BOARD 10.3 Horizontal Year/Numeric selector behaviour changes
Has anyone got any ideas as to how a selector, with numeric members, can be optimally configured to behave in the same way as that of BOARD 10.1.x? ORIGINAL CONFIGURATION I have a model that uses a horizontally configured selector for YEAR. Regular behaviour up to BOARD 10.1.4 is that the user can select a year from the…
-
Free your financial planning...
...from the constraints of Excel® and rigidity of traditional solutions BOARD FP&A is a turnkey solution that combines enterprise wide financial planning, budgeting, and forecasting with self-service analysis, reporting, dash-boarding and analytics – all on a single cutting edge platform for supporting decision-making in…
-
Procedure to Create a New Entity Element?
Hi folks, I'm working on an expense tracking application and I would like create a button where users click to create a new expense submission entity element. There are relationships from this new element that are all defaulted, so there is no need for any popups. Is there a way to create a procedure to create a new entity…
-
Reset Selection after Drill to Screen
Hi there, I have a short question. I'm using the "drill to screen" function to drill down from a chart to a screen showing some detailed data. After the drill to screen, my target screen shows the specific selection which was selected in the chart. In this target screen I want my user to change the selection with a pager.…
-
Installing Board client in Citrix
Hello, We want to publish Board client (10.1.4) in Citrix (XenApp) Is there any changes that we should do ? or we just need to install the board "setup.exe" Thanks in advance, Best regards, Ahmed Lattali
-
String Algorithms
Hello everyone, is there algorithms on Strings on Board? thanks!
-
Show selected month in Dataview Header
Hello there! Is it possible to change the dataview header name by the selected month, or some other selections? Thanks ! Regards Antoni Theodorou
-
Apply Master Layout Selection to Drill to Screen
Hi, I have an application with two(2) screens(lets say Screen1 and Screen2). On Screen1 are two(2) dataviews(lets say Dataview1 and Dataview2). Dataview1 has Master Layout enabled and Dataview2 has a drill to Screen2 configured. My problem is when I do a master selection in Dataview1 and then a drill to Screen2 from…
-
Screen Triggers in Board Web
Hi, I am using screen triggers to start a procedure, which calculates some numbers. However, the procedure does not run when I used Board Web. I tried 'On Open Trigger' as well as "On Close Trigger'. Anyone else facing similar issues? Best Mathias
-
Get data From Cube with rule
HI All, Can board get data from other cube with Rule?Thanks
-
Board freezes when clicking on selektors
Hi community, i still have a bug on a user client: Dell XPS 13 9360 Win 10 Pro fresh Board 10.1.4 installation Board opens normally, but if the user clicks on a selector, board freezes and no other operations are possible - client have to kill by the task manager. Unfortunately, i currently have no access to the computer,…
-
Comparison of 3 preset scenario, but changeable by the user using pager
Hi everyone, Main Request : I need to do in Board something looking like this : 1st pager must change impact selection of the first column, 2nd pager on the second column and 3rd pager on the third column. Do note that all 3 pagers are based on the same operational dimension : Scenario. I have a hard time figuring out how…
-
Error after 10.3 autoupgrade
Hello Running the client autoupgrade in some PC's apperas a warning message that only says "Access denied" (see picture) but just pushing OK it regularly connects and works. Has anyone experienced this? What could be the reason?
-
cubes don't shows
Dear Alexander Kappes after starting a database on board server 10.1.4 after making an upgrade and trying to show the cubes, a problem occur mentioning the following error message: BOARD CLIENT WORKING IN FAULTED STATE, PLEASE RESTART BOARD CLIENT AS SOON AS POSSIBLE. but the restart do not fix the problem, after cheking…
-
Anonymous Web User
How can I correctly set up the anonymous web user? I have already tried the suggested settings, but after the service is restarted the home page is not loaded. By resetting the anonymous user as false in appSetting.config, the home page loads correctly. Thanks. Michele
-
Board 10.3.0 -> Web -> Limitations Excel Export & displaying graphics/ diagrams &
Hello dear Board Team There are several limitations with the Excel Export and displaying graphics/ diagrams with the new version 10.3.0 Excample: - An error occurs if there is a special character in the header of the layout (/?@) - An error occurs if the header of the layout is longer than 31 characters This ist because…
-
Merge Capsules
Hi, I am working on an application in which the application is divided into multiple modules. Each module have its capsule but one database. now the requirement is to merge all the capsule into a single capsule. How to do that ?? Any help or idea.. Thanks
