-
Data Flow calculation to total
Hi all, when i have a Data Flow setup in the procedure it does the calculation for the entities but not on the Total Level. How can that be done calculated (not average) on the total line, too? Thanks Maik
-
Level 300 - Training environment expired
Hi Could you reset may trining evironment ? My license expired a long time ago, i'd like to start again from the beginning. Many Thanks
-
Vertical % Not on Grand Total
Hi, is there a way to show the Vertical % in Data Views as well for grand totals? (FC REV MIX in my data view) I can see it by column
-
Multiple "Detailed by" in Data view
Is it possible to use two ore more "detailed by" in an data view? It would like to report not only the average revenue / gross add per month by tarifcluster but by tarifcluster and a second or third entity.
-
Flexi Grid - Keep Top
It would be useful to have the ability to filter the number of rows displayed by the Flexigrid object. The functionality would be similar to the "Keep Top" feature in the DataView object. Regards ,
-
Paste Data view setup without overriding what is already in?
Hi, Is there a way to paste a data view setup without overriding what is already in?
-
Order with detailed by Selection
Hi there, In a data view i have 2 cubes and right after it a algorithm. All are detailed by an Entity. In the display of the report I can see by status RN / REV for the first status and then comes the next status. However the ADR is shown at the end not grouped into the statuses as with RN and REV. Any idea how to show RN…
-
Board course 300 part 1 - 306 Mismatch of results for question 2
Dear all When I run the allocation of the indirect costs and check the results of store FR0001 I don't get the right numbers. I reviewed the various steps according to the manual several times. Any tip how I can solve this issue? All temporary cubes are setup as "double" according to the instructions (as also discussed in…
-
Auto-size column width to ensure the value is displayed in full
For tables with many columns of numbers, the default width of those columns maybe too small, meaning the whole number is not fully visible. The user could resize columns themselves but this is tedious. As a default, could the column sizes be set to auto-size based on the largest data value? Just like in Excel. For example,…
-
How to autofit/autosize column width to width of object?
I have a simple dataview object where the size of the table itself is not as wide as the dataview object. Is there a configuration setting to autofit the column width/table width to the width of the data view objects?
-
Access to environment after courses are completed
Hi, I have completed all three levels and shortly I will not be able to access the platform. Now I wonder how can I go back to any of the topics or features that I have learned? Only through the trainings? That can be quite time consuming as probably I won't remember in which chapter of which level a feature was presented.…
-
Board Cloud Logs: Service Status / Shared Storage Capacity
Dear Community, Wishing you a New Year filled with joy and fun! I would like to know the location of the SharedStorageZ file in order to retrieve the current capacity of the Shared Storage ( Possible to get this info using an API call ?). Is there any possibility to check via an API whether the Board Service is on or off?…
-
subhub accounts, roles and folder profiles copy and paste
an option "save as" or "copy settings from" would be very helpful for panels indicated in the subject.
-
A new GCR version (1.1.0) is here!
A new GCR version (1.1.0) is here! We are happy to announce that a new GCR version (1.1.0) is now available for customers and partners! New Material available: IFRS Starter Kit A pre-packaged Starter Kit with pre-configured Group Accounts, Reporting Structures, cash flows and much more is now available! New features…
-
Level 300 Part 2: extend instance
Hi, my Level 300 PArt 2 instance is expiring this week, on Jan 10. Could you please extend the access period, please? I have already completed it but there is an error that I still could not clarify and I need more time. If I could have one more week, it would be great. Thanks
-
Layout in Excel Addin
Hello, Can we disable the layout in Excel Add in in order for the user not to modify it. does it have any impact if the user changes the layout on the excel. Thanks
-
dedicated and usable log file for main errors and best visibility
error messages are not immediatly visible and explenation is very small. these errors are tracked, i guess, in daignostic log togheter with a lot of other information. My ideas: errors should appear as a pop up window that is immediatly visible. oftern users don't see that the process they have launched had an error" set a…
-
Sap Analytic Cloud data import suggestion
hi, client migrated old bw database into a new sac platform. wondering if is possible in board14 to read data from SAC using other interface instead of the old theobald sap connector. any similar experience/suggestion to share? API? thanks
-
Alternative of excel add-in
As users have the option to load bulk data using excel add-in but still there are some challenges that users are facing with excel add-in. Is there any alternative of excel add-ins in Board to load bulk data in proper format.
-
Week display in Gantt Chart
Hi, i am worling with a Gantt Chart and i was wondering why the weeks in the columns are displayed like 11/03 - 17/03 and next week like 18/03 - 24/03 in 2025 meaning always from tuesday to monday. How can i change this that it shows monday to sunday like 10/03 - 16/03? Is there a kind of setting? Kind Regards
-
Unhandled Error Message
Hello everyone, I have a SQL data reader(SQL-DR) that Runs with no issues. However, when I want to Edit the SQL-DR, board returns this error message. An unhandled error occurred (cod_ref: 1736282661225) I have done some troubleshooting but issue persist. This link took me to similar issues from previous years. My error…
-
Inclusion of specific period in exported data views
It would be very useful to include in exported data view precise period that was selected by user - for example specific year in 5 year forecast. Currently after report is exported it is not possible to see what selections were applied if user won't manually add them.
-
Extract the list of IDP users
Allow Administrator / Users to extract the list of all users from IDP to a flat file in AZURE storage Today, it is only possible to extraxt the list of users via a browser
-
Card object - Align text
We request the possibility to align (to the left, right, center, top, bottom, middle) and format the text inside the card object. In our use case, we would like to use the card to display a log that track changes to the initiatives that we manage in Board. Each time a field is changed for a specific entity, a log is…
-
Allow the use of Temporary Cubes on Smart Import objects
The idea is simple: Allow the use of Temporary Cubes on Smart Import objects as we do for Data Readers. It should be possible to type the Temporary Cube name and load data into it. The Temporary Cube should be configured in the Trigger Procedure launched after a Data entry action. Today, for the Smart Import object, we…
-
Time Based Hierarchies
Publicly traded companies face the requirement of being able to report their historical data based on the hierarchy from that current time when asked to. Currently in Board, there is no way to do this cleanly. If we could create alternate hierarchies that dynamically link to the time tree instead of existing independently…
-
Disablin/Enabling Layout in Excel Add in
Hello Team, Excel Add In is a very interesting feature however it allows users to have full control of the layout design etc. It would be great if we could have control to disable / enable the excel layout design such that Business users cannot play around with them. Rgds
-
Excel Addin
Hello, Im usingthe Excel Add in feature to create layout. However, how do we flatten the layout. In board we have the option, but in excel add in , is there any work around please. Also is there any security option on the excel add in to prevent the user from changing the layout? Thank you Rgds
-
Transporter improvements: ability to edit transporter packages, display physical names of DB objects
Hi! I have recently migrated the changes from sandbox to production on Board Version14.1 Revision 0.0.208107. I would like to suggest some improvements to the transporter functionality that should make the migration easier: Add the ability to edit the transporter package, whether it's a data model package or a capsule…
-
Cannot insert Member - Time Entities
Hi everyone, happy new year. Can i ask why i am not able to insert members to an additional time entity> thanks maik