-
How to define and manage the time range
1. Abstract In Board, the definition of the time range becomes very important because it guides the data that will be loaded and made visible to the end user. When setting the time interval, there are some considerations to bear in mind to avoid running into unpleasant situations during the development phase, where the…
-
Ability to enable data entry at groupings when hide totals row is enabled
Hi, we have a customer who's asking if we could enable data entry at a grouping level when multiple entities are by row when the total row within the grouping isn't enabled through the feature of hide totals row. Since there are multiple entities by row, it is proving to be a hassle to locate the total row for each…
-
Enable Data Entry on Flex Grid
Greetings, A good idea to enable data entry on flex grid. thanks
-
Struggle to understand NEXEL
Hi BOARD Team, After reading through the manual, I still cannot understand how NEXEL reference works. In our production system: Active cell is 5.6. Formula is =[@b;-1;*]/AVERAGEIF([@b;-5;*]:[@b;-5;+12],">0"). My understanding: [@b;-1;*] pointing to 7,162. Is it correct? [@b;-5;*]:[@b;-5;+12] pointing to Demand layer for 12…
-
Nexel - Can the formula be triggered on value change of another column
Hello A column X (nexel formula has been created) has to be calculated when im changing a value on another column (no save data entry). When i change the value bud-de-% Increase, the formula is not being triggered on Column CY Budget. Does nexel works only on SAVE DATA ENTRY? Thanks
-
For multi-tab screenshot output functionality.
With the second or later tabs of a multi-tab open If a screenshot is taken with a second or subsequent tab open, the image of the first tab is output. Therefore, if you take a screenshot of a screen with multiple tabs, We would like to be able to take a screenshot of the currently open tab.
-
what are available tools in board for User journey track of Board ?
Currently we are looking for a solution, To track board users tool monitoring. As board developers we want to understand and track board user journey track. On which modules our users spending more time, what screens are used the most? At which screen the users is facing the response time lag and other. If you have any…
-
Level 100: Screen Design
Greetings, I have three cubes populating data as expected. When I drag these cubes unto my Data view, I get the data, but the arrangement is my problem. I need data from all three cubes to appear something like this. In my case: EARINGS will be a cube, OP CASH FLOW my second cube and NET CASH FLOW my 3rd cube. Where can I…
-
How to deactivate Color Alert in Totals
Hello everyone, we use the color alert in a table. This works just fine for the individual elements, but the total is not shown as a block color but in green or red font. This is difficult to see due to our default color scheme. Is it possible to display the total in black font and the remaining numbers per element still…
-
Visible cube content
It would be great if we can check cube content in a tabular format, using a standard built-in function. Now we have to go through all the steps: 1) create a screen, 2) drag a dataview component, 3) setup the layout, just to check the cube content.
-
How to migrate to Subscription Hub
1. Abstract Moving to the Subscription Hub all the User management of a live application such as user information, roles, licenses, metadata and custom selects might be challenging. This document aims to guide the client step by step through the transition avoiding any potential inconveniences. 2. Context There are…
-
Using Analytical Function: Linear Regression
Hello, i want to add in my chart a linear regression per each year to identify a trend. LayOut: The Linear Regression is showing the same Figures as column CY. What do I have to consider to make it work? I would like to add the analytical function per Year. Aim: (Excel - linear trendline)
-
Level 100
I have two cubes (A and B). With a Data view, cube A looks something like this; and Cube B looks something like this; I want to generate a 3rd table which SUMS both tables. Like 29(in red) from 1st table to 3(in red) from 2nd table. I did this at the level of database using SQL. However, I need to do this in board. Any…
-
End User Documentation - Board Excel Add-in
Hello Board Community, Is there any documentation about the Board Excel Add-in for End Users that you may provide? Our system is on version 12.4. Please let me know if you have any questions. Thank you, Leico
-
Roles and Folder Security Profiles
When copying over data models from production to the sandbox, the user Roles and Security Profiles did not get copied over. It's fine since I don't need them in the Sandbox environment, but when we go to copy the sandbox back over to production, I don't want it to overwrite or erase the profiles I have. Can anyone shed…
-
Level 300 Module 305 - Build the Planning Expansion - New Product Planning Based on Drivers
Planning Drivers Data View Object section: In step 6, the user is told to change the By Row set up and to remove data blocks "b" and "c"; yet step 8 refer to block "b". Because step 6 is to remove blocks b and c, I can not set the Filer on Value to block b. The screenshot also references Planning Method and Product in the…
-
Use Nexel to refer to previous line value
Hello, I am trying to use Nexel to work on a dataview but cannot manage to figure out how it works, and the nexel documentation on community is not detailed enough. I am trying to replicate that excel formula in nexel, can someone help ??
-
URL Commands
Hi Community we are on BOARD 12.4. Is it possible to use URL commands to jump into a screen via link with a selection on one entity? THX
-
LEVEL300, Module305: Regarding Functional Test Question 1.
Dear Board support team, LEVEL300, Module305: Regarding Functional Test Question 1, I received the following results. However, it was marked as incorrect. I am unable to proceed and facing significant difficulty. The setup was performed following the steps outlined in "Build the planning expansion: New product planning…
-
Monthly Customer News Update - Summer 2024
Goodbye Manual, hello Knowledge Base Summer is here (at least for those in the Northern Hemisphere)! And while we grab our kids, pets, tents, swimwear, hiking boots, or whatever else we consider necessary to enjoy the season, we wanted to share some quick reads and helpful videos to keep you up to date: FP&A Trends E-Book:…
-
Level 200 Module 204 Lesson 7of9, Can't Load Italy Data
Hi I have checked and double checked everything suggested to load the Italy data. Valid records come in at 6534 with 1 discarded record. I cant access the log file directly on C:\Board\Dataset\Hierarchies and Data, but if I play around with the prevue on the source file screen I can see the log file contains [Rec.0] Error…
-
Selection applied only to 1 layout in screen
Hi, The idea/need is to be able to apply a dynamic selection to 1 layout only among many others in the screen. Today we can apply a selection to a block but not to the whole layout by a capsule procedure. Linked to ticket : 00120539 Thanks
-
SELECTED CELLS INFORMATION
Hi, My users would like to have the information "Selected Cells Information" like below, today only available in the "Lock and Spread" section. The need would be to have the info displayed while selecting several cells in the play mode. Idea linked to Nicolas CHIGROS's idea : Thanks and regards, Augustin
-
Bring automatic font contrast color for alerts to labels
Hi team! We appreciate having the font of blocks with an alert adjust to the respective color of the background in DataViews, so that the values remain visible, e.g.: It would be good to have the same behavior with alerts on labels, also. Right now, the default alert font color "black" cannot be overwritten, making dark…
-
Add Bookmark on Interactive Selection
Hello, We think it can be helpful to add a "+ Bookmark" button on Interactive Selection from a procedure as it already exists on the Selector object. Selector object : Interactive Selection :
-
Visibility of tab item
If the content of a tab item is not visible anymore (due to "Object Settings/Dynamic Options/Visibility"), the tab item itself is still visible: The additional option to hide the tab item itself, in case the related content is not visible anymore, would be helpful:
-
SubscriptionHub application sorting
In the SubHub currently the applications are sorted based on the creation order, if you have several servers/application the view can be very confused for an administrator or also for users with multi platform access, all the prod and Sandbox environment are mixed up in a unique list. It could be very useful to have a…
-
Enable Substitution formula for Waterfall chart objects
The substitution formulas @Selection and @Month doesn't work in waterfall chart. Need to enable this as chart details won't give meaningful insights without this function
-
Level 300: Module 303 - Forecast Section
After I initialize planning, and update the P&L my screen does not look like the screen in the training. It appears that I am missing the Income data. Did I miss a step somewhere? Training image: My screen:
-
Data entry Shortcuts on ""Vertical alignment"
Hello, The idea is too allow user to user Data entry Shortcuts (example ">Value" or "+Value") on Dataview with Blocks alignment= "Vertical" For now as i see, the shortcut is not possible. Best regards Amir