-
Board Cloud Status Page: Launch Update
Recently, we shared that the new Board Cloud Status Page would be launching soon. In case you missed it, this new platform will provide logged-in customers and partners with real-time visibility into the health of Board Cloud services — including ongoing incidents, planned maintenance, and service availability across…
-
2025 Board Feedback Flash
At Board, your feedback is central to how we grow and improve. Earlier this year, many of you shared valuable insights through our extended CSAT survey — and we’ve been working hard to act on what we learned. Now, we’re checking in again with the 2025 Board Feedback Flash — a short follow-up survey to see how we’re…
-
November 2025 U.S. Economic Outlook: Growth Under Pressure
The latest Board North America Economic Outlook shows an economy still expanding, yet increasingly defined by transition. Resilient consumer spending and selective investment are supporting growth—but beneath the surface, uneven demand, policy uncertainty, and labor softening are reshaping the business landscape. With…
-
The Insight Loop – October 2025, an Economist Roundtable
Where Economic Intelligence Meets Strategic Action Is today's consumer spending fueled by income growth or wealth effects, and what does that mean when the market shifts? Our economists tackle four critical questions about spending, saving, and the signals that matter for your 2026 planning. October Episode: Economists…
-
November CommunityCast and Badge Opportunity
🦃 The year is flying by and the holiday season is around the corner with Thanksgiving in the United States just weeks away. What are you thankful for this year, personally and/or professionally? Feel free to share below and be sure to check out our monthly updates to learn about what was new in Community in October. Here…
-
Accepted Answers Go Farther
The Board Community forums are the place to go for DIY questions and answers in rapid time. Platform Discussions offer specific Board insights, Academy Discussions help you succeed in your training, and the Partner Forum provides a dedicated place for Partners to share. How can you help optimize the forum experience for…
-
Now Available: Board Advanced Developer Certification for Customers
We are pleased to announce that the Board Advanced Developer Certification Exam is now available for customers. This advanced-level certification is designed for experienced builders who want to validate and showcase their expertise in designing, modeling, and deploying complex solutions in Board. About the Exam 40…
-
5 Tips for a Successful Board Setup
Author: Karry Schupp, Senior Financial Analyst for DH Pace Company and Community Captain. The setup process for Board can be daunting. Board and your Partners are relied upon extensively during the setup process; however, they only understand your expectations based on your communication with them. After experiencing the…
-
Board 14.4 is here!
We are pleased to announce that the Board 14.4 release is here! 🚀 The new Board 14.4 release includes significant improvements for Developers, Administrators, and Planners (End Users). Board 14.4 proudly introduces the new Board Foresight Add-On allowing users to integrate both internal and external data for forecasting…
-
Analyst Review: Gartner Peer Insights (multiple opportunities) (150/50 points)
Board is working with Gartner Peer Insights to publish independent ratings and reviews of Board and would like you to participate, starting with a quick click below. Your review is anonymous (only information about your company industry, company size, job title, and geography are displayed). Leaving a review should take…
-
How to use Nexel to select custom time periods
*NEW - includes video demonstration. Build Along with Board Follow along as we bring this step-by-step guide to life. https://player.vimeo.com/1105912052 Quick reference: 4:32 - Custom time period selector 7:23 - Create members 8:38 - Create the cube 10:09 - Create Nexel layout > complete Nexel process begins here 1.…
-
The new Board knowledge base is here!
Following the Board 14 release, consisting of a brand-new user interface and improved user experience, we are proud to announce the new Board knowledge base! The new Board knowledge base replaces the Board Manual from version 14 and newer as a support center for helpful resources that reach beyond only documentation.…
-
Groups FAQ
Welcome to Board Groups! We’re glad you’re here. What is a Board Group? Board Groups provide dynamic opportunities for members with similar interests, shared challenges, and business goals to solve problems, share key learnings, and foster meaningful connections. Created as an opportunity for valued customers to take the…
-
How to Edit the Max Item Number
*NEW - includes video demonstration. 1. Abstract The Entity ‘Max Item Number’ is used to reference data stored in a Cube version. It determines how the data pages are physically stored and influences performance as much as dataflow execution. 2. Context The amount of master data will increase during an application…
-
Unable to calculate Average, Standard Deviation, and Variance for Derived Lead Time Field
I have a dataset with two date fields: Load Date and Delivery Date. I calculate Lead Time as "Delivery date-load date". Now, I need to compute the following statistical measures for this Lead Time:Average (Mean), Standard Deviation,Variance. However, when I try using formulas like Subtotal (sub function code, x,…
-
Unable to calculate Average, Standard Deviation, and Variance for Derived Lead Time Field
I have a dataset with two date fields: Load Date and Delivery Date. I calculate Lead Time as "Delivery date-load date". Now, I need to compute the following statistical measures for this Lead Time: Average (Mean), Standard Deviation,Variance. However, when I try using formulas like Subtotal (sub function code, x, y), AVG,…
-
Exporting Quick Layout charts or showing the Chart Data
Hi, is there a none issue exporting charts with an adjusted Layout - through quick layout? It gives me always the dimensions of the original setup. I changed the chart axis from months to quarter however the Data chart is still considered with the setup axis - month Br,MAik
-
Flex Grid
Hi, When I hide block D and E i am receiving the issue message: I didn't configure anything by column. I am not sure what it actually means. Any thoughts? Btw. Is there a way to add Tags? I can imagine it is beneficial for others when searching for Flexgrid in the community - but it doesn't exists. Thanks, Maik
-
Board course 300 part 1 - 306 Mismatch of results for question 2
Dear all When I run the allocation of the indirect costs and check the results of store FR0001 I don't get the right numbers. I reviewed the various steps according to the manual several times. Any tip how I can solve this issue? All temporary cubes are setup as "double" according to the instructions (as also discussed in…
-
Level 300 Part 1 - 306 Wrong results for Functional Test Q2
Dear Board, I am getting wrong value in Expense Planning Screen for store FR0001 Any tip how I can solve this issue? Thank You, Abhishek
-
Board course 300 part 1 - 306 Mismatch of results for question 2
Dear all When I run the allocation of the indirect costs and check the results of store FR0001 I don't get the right numbers. I reviewed the various steps according to the manual several times. Any tip how I can solve this issue? All temporary cubes are setup as "double" according to the instructions (as also discussed in…
-
Level 300 part 1 module 306 functional question 2
Hi Team, I am off by 8 but I don´t know where. Can you help? Also my training environment expires on Saturday, can you extend? thanks
-
Level 300- 306 Module Functional testing Q2
Hi Team, I am facing issue in 306 Functional testing Q2 after data entry for [Office salaries, office Technology Software and Hardware, Global marketing Campaign] in Indirect global Expense planning and then navigate to expense planning screen and select the FROOO1 Store but i am getting wrong data .. Office Technology…
-
LEVEL 300: Module 306 - Functional Test
Can you please help or share any tip, regarding the last figures on 306, I am almost giving-up 🙄
-
Level 300, Module 306 : Facing issues in 306 functional test Q2
Hi Team, I am facing issue in 306 Functional testing Q2 after data entry for - Office salaries, Office Technology Software & Hardware and Global marketing Campaign in the Expense planning page. After following all the instructions and removing the flag from 6400 wages the following are my results: Office Technology…
-
MS Azure cleaning
Hello, Is there a way to schedule an automatic cleaning of Azure ? we are piling backup for all our 3 environnements and this is not cool from a green perspective :). thank you, Catalina
-
How to create bar chart in Data View
1. Abstract This article describes a specific use case: visualizing a bar chart in a data view object. 2. Context In some projects, it can be asked to render a bar chart in a data view object, to provide an immediate visual representation of the numerical values directly in line with the data. This allows users to more…
-
Error Management in Data Reader Procedure Steps – add the option “Ignore errors (back-compatible)”
The DR errors management in version 14.4 is a GREAT feature but introduces a constrain: by each data reader the user HAVE TO specify the “go to group” in case of error, and cannot simply set it to say “please go ahead”, as was in previous versions. When I have in a procedure e.g. 20 data readers I should set 2 groups by…
-
Connecting to Datawarehouse on Fabrics
Dear, while trying to connect to a datawarehouse on Microsoft Fabrics, following error is being raised However, connection is successful on SSMS. Grateful for a guidance. Thanks Khaleelah
-
Connection Board to Azure fabric - cloud SQL DB
Hi We have Board on Azure cloud supported by Board. We are moving from our old ERP solution to MS Dynamics 365. The data will be moved from Dynamics to the MS data model and to Azure Fabric – cloud. Are there any others that have made the connection from Board to Azure Fabric? We are struggling to get the connection to…
-
Not able to perform average
I have taken one solution building task Months are selected like 12 months from jan to dec I have taken cargo revenue jan to dec each month has equiavalent revenue Now, I need to calucate seasonality index = Revenue of month Jan/ Avearage revenue from all the months I am not able to perform the action , Please help me with…
-
Missing Ctrl+F functionality with in the Dataview.
The user needs to highlight the searched item with in the data view by using ctrl+f functionality. we don't see this functionality in Board14. User experience is effecting without this functionality. could you please make a note of this idea and try to add in upcoming versions.
-
If then else in procedure: which role plays the current active selection?
Dear community, I am wondering which role the current active selection plays in an If then else procedure step. According to the help https://help.board.com/v14/docs/execution-flow-action-group#if-then-else , the selection context existing (user profile, screen selection, Pager's selections…) when the step is run should…
-
Selection by a cube
Hi, I have a screen selection by a cube. When I do another selection on the same hierarchy / relationship it removes the cube selection. Hotel is part of a country I select through a cube all active hotels. When I now select only some countries it shows inactive and active hotels because the cube selection has been…
-
The Backup Mentality
1. Abstract Each Board environment should foresee an appropriate backup policy for the existing Data Models, should it be a development, sandbox or production environment. Such backup policy must always be present and it should be developed on top of the standard backup policies implemented by the cloud team for disaster…
-
Enable Full UI/UX Customization for Selector Pop-Up Window (Screen Object)
Problem Statement: The current Selector Pop-Up window (invoked when selecting members from an entity/object) uses a standard, non-customizable Board dialog. While the Selector object on the screen can be restyled (fonts, colors, borders, orientation: Pop-up, Vertical, Horizontal), the pop-up selection window itself cannot…
-
Module 304, Level 300: Incorrect data is populated.
Module 304, Level 300: During functional test after updating P&L in Profit and Loss Planning statement screen, incorrect data is getting populating which is 133779307 in net income row.
-
General Question: Can the way of concanate be chosen somewhere?
Hi, if you choose that you want code and description be shown both together they are always linked with a " " but can this be editted somewhere? I would prefer to have them linked via "_" for example.
-
B14: level 303_Question about Label "@Selection"
Hi, I have a general question about the mechanic of Label objects and the "@Selection" caption. As recommanded during the lesson if I use the dynamic selection of "version status" the "version" will be selected analog settings in administration screen. If I add a label and use caption @selection, it shows only those…
-
B12: module 302_Setting up Actual Reporting Months via Data Entry not possible
Hi, in this run of Level 300, Part 1 I face the issue, that it is not possible for me to set the "Actual Reporting Months" via Data Entry in Data View Object. Even if I enable Data Entry the column does not become yellow and clicking the checkbox does not work at all. Any idea how that could happen?
-
Flex Grid equivalent locked by Options
Dear Team, Can someone please explain to me the equivalent for locked by cells found in dataview In flexgrid , we have only cells locked by What would be the equivalent of the dataview to flexgrid. Thanks Khaleelah
-
Introducing Scout: A Helpful Guide to Fast Answers
We’re excited to welcome Scout to the Board Community! Think of Scout as your helpful guide, always on the lookout to fetch the best answers to your questions. Powered by our Community AI assistant, Scout delivers suggested answers to forum posts within minutes, helping you find solutions faster and keeping the…
-
Incorrect values
I am building a solution in the board platform, I have set up the procedures correctly taking cargo previous year multiply with growth factor and target should populate the result but the result is incorrect the values are not correct. the growth factor is 10 Why is the value is incorrect?
-
Why does custom selection script @user requires the "Administrator" username?
Hello, i am working on database security profiles. I have a user_name entity in which a few of my business users are stored. I don't need all users to be in this entity. I want to implement the simple custom selection script Select user_name = @user, see screenshot below. But then i got this error message Warning!…